Product Manual
23
PRODUCT USE
Introduction to sweeping and mopping functions
and press the button again to continue cleaning; and press the Charge Button to return to the station
to charge. The cleaning task will be ended if you put the robot back into the station for charging when
pausing.
2. Sleep: The robot will be standby when it is paused for more than 10 minutes. If there is no operation
after the robot is standby for 10 minutes, status indicator will shut down. Press any button to wake the
robot up. When the robot is charging, it will not enter the sleep status. The robot will automatically
During the Do Not Disturb period, the robot voice prompts will be disabled and the robot will not
continue to clean the area where it stopped.
4. Charging: After a cleaning task is ended, the robot will automatically return to the station to charge.
into the station.
5. Abnormal status: The indicator blinks red quickly and you will hear a voice prompt. For solutions,
please refer to the app or “Common issues” in this Product Manual. If there is no operation after the
abnormal status lasts for 10 minutes, the robot will automatically sleep.
Button on the robot at the same time for 15 seconds when the robot is turned on. After you hear a
status. All saved data will be cleared up.
station. In addition, do not move the station, remove the clean water tank/sewage tank, or remove the
function and cause the robot to skid.
4. If there is no task, the robot will enter sleep status after pausing for 10 minutes.
robot will enter the sleep status and automatically end the current task in situ.
box full, the robot will automatically return to the station to clean the mop. After the robot is charged
area where it stopped.
Other recommendations
Description of some common functions