Product Card

a) 30W, 40W-PRO adjustable focus module, the distance between the lens and the
sculpture is 20-40 mm.
b) The distance between the 40W-PRO fixed-focus 20mm lens and the carving object is
20mm, so this module can be carved well
c) The distance between 40W-PRO fixed-focus 40mm lens and engraving is 40mm, so this
module can cut well
d) The distance between 80W fixed-focus 45mm lens and engraving is 45mm, and this
module is the best for cutting
2. In theory, the machine can work for a long time, but in order to better protect the laser head
and prolong its service life, it is recommended to work for 2 hours and rest for 2 minutes
3. If you have any questions, you can contact customer service (), or you can contact us by
email on the website "".Contact informationcontact us
IV. Maintenance
1. Do not use the machine in damp/hot places.
2. Do not touch and operate the machine with wet hands.
3. Please wipe the lens of the machine regularly with a cotton swab dipped in alcohol to protect
the lens.
V. Contact us
1. Enterprise name: ZBAITU
2. Address: Room 501, Building C, Boxing Industrial Zone, Gongye West Road, Minzhi Street,
Longhua District, Shenzhen
3. Email：[e-mail]
appendix
TSLD40W_XX_PRO
Material Marking Craving Cutting
Plywood 5mm
√ √ √
Plywood 8mm
√ √ √
Plywood 18mm
√ √ ×
MDF board 5mm
√ √ √
MDF board 8mm
√ √ √