Product Card

2. Connect the software
Connection mode 1 (wired):
1. Turn on the machine power
2. Connect one end of the data cable provided by us to the USB port of the machine and the
other end to the USB port of the computer
3. Open the computer operating software and click the connect button to connect
Connection mode 2 (Bluetooth):
1. Turn on the machine power
2. Open the WIFI connection list of mobile phone or computer
3. Select the network "GRBL_ESP", password: 123456789. (please disconnect the wired
network for PC), and wait for the network connection
4. Then open the browser and enter the IP address of the controller ("192.168.0.1" in the
example) in the address bar to open the Web control interface
5. Set the parameters as shown below