User Manual

5
UNBOXING
Intro Unbox your scooter
Setting up your scooter right is the single most
important step to your safety.
Please note that this process is also available
in video format through our help centre. Visit
apolloscooters.co/support to view it.
We recommend having the following items
ready prior to starting the setup process:
t#ox cutters or knife
t4UPPMPSCFODI
t"JSQVNQ
t4Urong friend
Open the box using the box cutter and fold
open the top. Inside you should see protective
styrofoam along with the following contents:
t Apollo City electric scooter
t Manual
t Charger and cable
t Allen key
If any of these items are missing, please contact
us immediately via apolloscooters.co/support .
With the help of someone, remove the scooter
from the box and place it on a flat surface.
We recommend using a stool or bench as the
wheels need to be able to spin freely.
Carefully remove the protective material from
the scooter and set it aside. We suggest keeping
both the styrofoam and the box in case you
need to ship your scooter back to us. Otherwise
recycle the materials wherever possible.
4
t Escooter model 4141 has 1 motor
t Escooter model 4142 has 2 motors
Model: L9C
FCC ID: 2AZ3Z-ZSF9
IC: 27323-ZSF9
This device complies with part 15 of the FCC Rules.
Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including
interference that may cause undesired operation.