User Manual
4 5
UNBOXINGSPECS
Intro Unbox your scooter
Setting up your scooter right is the single most
important step to your safety.
Please note that this process is also available
in video format through our help centre. Visit
apolloscooters.co/support to view it.
We recommend having the following items
ready prior to starting the setup process:
t#ox cutters or knife
t4UPPMPSCFODI
t"JSQVNQ
t4Urong friend
Open the box using the box cutter and fold
open the top. Inside you should see protective
styrofoam along with the following contents:
t Apollo Air electric scooter
t Manual
t Charger and cable
t Allen key
If any of these items are missing, please contact
us immediately via apolloscooters.co/support .
With the help of someone, remove the scooter
from the box and place it on a flat surface.
We recommend using a stool or bench as the
wheels need to be able to spin freely.
Carefully remove the protective material from
the scooter and set it aside. We suggest keeping
both the styrofoam and the box in case you
need to ship your scooter back to us. Otherwise
recycle the materials wherever possible.
WARNING:
Incorrect assembly, maintenance, or use of your Apollo scooter
can cause component or performance failure, loss of control,
serious injury, or death. Even if you’re an experienced scooter
rider, you must read and understand the entire manual and any
documentation provided for subcomponents or accessories
before riding. If you are not sure you have the experience, skills,
and tools to correctly perform all assembly steps in the manual
and the assembly video at apolloscooters.co/support , consult
our support team or a local electric scooter shop.
Net Weight 17.6 kg
Dimensions 116 x 53.5 x 114 cm
Maximum Load 120 kg
Minimum Load 20 kg
User Height From 130 cm to 190 cm
Maximum Grade % 10%
Maximum Speed 20 km/h
Range Up to 50 km depending on dierent factors including but not exclusive to: user's weight, road conditions, speed.
Battery 21700 cell 36V15Ah ( 30 cells X 5000 mAh)
Battery Type Lithium-ion
Power Requirement AC110-240V / 50-60 HZ —— Input: AC 100-240V 50/60 HZ 2.0A —— Output: DC 42V 2.0A
Charging Time 7h-8h
Wheels
Front: 10 inch rubber tyre, inflatable inner tube. Bearings: 6001RS. —— Rear: 10 inch rubber tyre hub motor, inflatable inner tube.
Bearings: 6202RS. Make sure to respect inflation pressure recommendations: Front tire max 2.4 bar or 36 PSI, rear tire max 2.4. bar or 36 PSI.
Motor 500W
Brakes Front drum brake and rear regen brake
t E-scooter model : 3151.