User's Manual

ManualsBrandsShenZhen YuLe Technology Development ManualsStreaming Media PlayersTV BOX

Highlights

Key Features

Android 9.0 OS.

CPU: Amlogic S905X2, Quad-Core ARM Cortex-A53, 18.400

DMIPS.

GPU: Penta-Core Mali-450 Up to 850Mhz.

RAM: 2GB/4GB DDR.

ROM: 16GB/32GB/64GB EMMC.

Ethernet Network: RJ45 IEEE 802.3 10/100M.

2.4G WIFI IEEE802.11 a/b/g/n

Support Decoder format: 4K 75pfs /VP9 Video decoder,

H.265/H.264 video decoder, 1080P other video decoders (VC-1,

MPEG-1/2/4, VP6/8).

Support HD 2.0 out.

USB host: 1*High speed USB 3.0, 1*USB 2.0, with maximum

output current of 800mA/5V.

HDR: HDR10 and HLG modes.

3D: 3D video formats.

Software upgrade via USB and OTA.

G5: RAM 4G+ROM 64G EMMC, Built-in WIFI 2.4G

English

USER

MANUAL

Summary of content (9 pages)

PAGE 1
English USER G5 MANUAL Key Features Android 9.0 OS. CPU: Amlogic S905X2, Quad-Core ARM Cortex-A53, 18.400 DMIPS. GPU: Penta-Core Mali-450 Up to 850Mhz. RAM: 2GB/4GB DDR. ROM: 16GB/32GB/64GB EMMC. Ethernet Network: RJ45 IEEE 802.3 10/100M. 2.4G WIFI IEEE802.11 a/b/g/n Support Decoder format: 4K 75pfs /VP9 Video decoder, H.265/H.264 video decoder, 1080P other video decoders (VC-1, MPEG-1/2/4, VP6/8). Support HD 2.0 out. USB host: 1*High speed USB 3.0, 1*USB 2.0, with maximum output current of 800mA/5V.
PAGE 2
SAFETY INSTRUCTIONS This STB has been manufactured to satisfy the international safety standards. Please read the following safety precautions carefully. 1.Mains supply: 100-240V AC 50/60Hz,Operate the unit only under the power source specified in "Specifications". 2.OVERLOADING: Do not overload wall outlet, extension cord or adapter as this may result in fire or electric shock. 3.LIQUIDS: Keep liquids away from the STB.
PAGE 3
11.WARNING: For the terminals marked with symbol of " "may be of sufficient magnitude to constitute a risk of electric shock. The external wiring connected to the terminals requires installation by an instructed person or the used of ready-made leads or cords. Explanation of symbol, marking, signal lamp or similar means indicate that apparatus is completely disconnected from the mains. This equipment is a Class Il or double insulated electrical appliance.
PAGE 4
Warning: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
PAGE 5
Connection TV AV Connection：Connect the AV cable of the 3 color (Red/White/ Yellow) to the TV’s AV output interface, the other end to TV set AV input interface. Connect by color, and TV’s set to AV input mode. HDOUT Connection: Connect HDTV cable into the product interface, the other side into a TV set. TV’s set to HD input mode.
PAGE 6
Remote Control You can power on/off the receiver, operate on screen menu, and use a variety of hot key function. TV CONTROL ZONE TV TV SET V+ V- 1 2 SET 3 4 5 6 7 8 9 RECALL 0 DELETE HOME FAV MENU EXIT PG VOL Infrared learning function operation guide: 1. Press and hold the " /SET " key of the TV area of the DVB remote control for 10 seconds, the indicator light of the remote control is always on, and enter into the infrared learning state. 2.
PAGE 7
EXIT PG VOL CUSTOM INFO EPG EXIT: Cancel the user selection and return to the viewing mode from a menu. ◄/►: To adjust volume level, or to move cursor left or right in the menu. ▲/▼: To change channels, or to move cursor up or down in the menu. OK: Select menu option, or to updated on entry. PAGE +/-: To move up the cursor to the next or previous page in the channel list. VOL+/-: To adjust volume level :Search key (requires APP to support search function). MUTE: Mute the sound.
PAGE 8
Startup Make sure that you have properly installed and connected the cables of the receiver. If the receiver is the factory status or there is no program list, when power on, the Main Menu window will be displayed on the screen, the LED light is on, about 60 seconds to enter the main interface. Press the “►” and “◄”button to select，and press "OK" button to enter the icon APP. Upgrade & Backup Open the "Update" application. Choose "local update" and select the upgrade file.
PAGE 9
Upgrade：OTA Open the "Update" application. Choose "online update" and it will check the latest upgrade package. Note: In some models which do not have online update feature, it may only have "local update" item. Troubleshooting Check the possible failure modes and the suggested; Solutions on the chart below during your use of this, Receiver before requesting any service some, Simple checks or a minor adjustment on your part may help, eliminate the problem.