User's Manual

Table Of Contents

2.Installing the Controller on the Camera

1). Unscrew the locking ring of the controller.

2). Slip the mounting foot into the hot shoe of the camera.

3). Turn the locking ring according to the direction of arrow,

the locking pin will protrude from the mounting foot.

Open the cover and install two AA

batteries (excluded)according to the

marks , rechargeable batteries of 1.2V

can be used.

1. Installing the Batteries

Remove the batteries when the product is

not used for long time. Please replace the

both two batteries at the same time.

3. Power ON.

Power on when the power switch slides to [ON].

Preparation Before Use