User's Manual

A-LCD: Display all the settings of controller, convenient for your
view and setup.
B-2.5MM Shutter release interface: Wireless shutter release
function(P.13).
C-AF assist beam emitter: (P.10)
D-PC interface: Input the flash sync signal(P.12).
E-USB interface: Firmware upgrade through connecting the
computer(P.15).
F-Mode button: Each time you press the switch in the flash
mode(P.8).
G-Group button: The arrow shown the switch setting group(P.8).
H-TEST button: Long press for flash awaken, loosen for flash
testing(P.11).
I-Select/Set button group: Multifunction button group, including
the [UP] [DOWN] [LEFT] [RIGHT] and [OK] buttons, which can set
the channel, ZOOM, flash output and other parameters.
J-AF/SS button: Short press for AF
switch(P.10), long press for [Super Sync] parameter setting (P.9).
K-ZOOM/CH button: Each short press for A/B/C three groups
switch(P.10), long press for channel setting(P.7) .
L-Power switch: Slide to ON for power on.
M-Status indicator : The green light will bright when in
communication, while the red light will bright when in triggering (or
shutter releasing).
N-Locking ring and locking pin: (P.6)
O-Hot shoe Mounting foot and contacts: (P.6)
P-Battery compartment and battery cover: (P.6)
assist beam emitter
Name of Parts/Quick Start Guide