User's Manual

Table Of Contents

1).Install the YN-622N-TX controller on the camera’s hot shoe,

and use LS-2.5 series shutter connecting cable(may

additional purchases) to connect the controller and camera.

Support single shot only.

If the controller does not installed on the compatible

camera’s hot shoe, the shutter will release when pressing

the [TEST] button of transceiver.

2).Long press the [TEST] button of YN-622N transceiver to

focus, loosen the [TEST] button to shot. If the flash installed

o n t h e Y N - 6 2 2 N t r a n s c e i v e r, t h e f l a s h w i l l f i r e

synchronously.

Use the YN-622N transceiver for wireless transmitting, the

YN-622N-TX controller as the shutter signal output.

Shutter Release Function

The compatible shutter release cable list:

LS-2.5/N1:

LS-2.5/N3:

LS-2.5/N2(Optional):

D200/D300/D300S/D700/D800

D90/D600/D3100/D3200/D5000Series/D7000Series

D70/D70S/D80