User's Manual

Page 12 / 35
In case of the following, please charge immediately
 The icon " " of low battery indicator flashes, and the display shows" Lo ".
 The LCD does not display after pressing the button
Warning
 We don't provide power adapter. Please purchase DC 5V1A power adapter which has passed IEC 60601-1
test. Do not use damaged power adapter, otherwise the monitor may be damaged or inaccuracy.
 After fully charging the battery, if the working time of battery is shorter than before and you want to replace,
don't try to replace the rechargeable battery by yourself. Please the manufacturer for replacement. Self-
disassembly and replacement the battery may cause damage to the monitor and battery.
 Whenever the device is not used frequently, charge the battery once a month.
6.Directions for use
6.1 System setting
1) Unit setting
Keeping press the user 1 button “ ” about 3s, the LCD will display flashed “mmHg” or “Kpa”, press the memory
button “ ” to switch the unit, then press the user 2 button “ ” to confirm the selection.
※In the unit setting state，press the user1 button “ ” can cancel the setting and power off the device.
2) Volume setting
Keeping press the user 2 button “ ” about 3s, the LCD will enter volume setting mode and display flashed
“Voice level”, press the memory button “ ” to adjust the volume, then press the user 2 button “ ” to confirm
the selection.
※In the volume setting state，press the user1 button “ ” can cancel the setting and power off the device.
3) Date/time setting
Keeping press the memory button “ ” about 3s, the LCD will enter date/time setting mode.