Users Manual

Switches between Bluetooth and Wi-Fi Connections
Switches between Bluetooth connections and Wi-Fi connections are automatic, no user interventions are
required.
Of course, if you haven’t setup your Wi-Fi connections yet, you will always use the Bluetooth connections.
There are no switches.
If you already setup your Wi-Fi connections, your Bluetooth connections are also setup. If you open your
app before you make a scale measurement, the Bluetooth connections will be used. Otherwise, if you didn’t
open your Runcobo app (or your phone’s Bluetooth is disabled, or your phone is too far away from your
scale), then you will use the Wi-Fi connections. Switches between the two are automatic. Users don’t need
to worry about which connections are used. Either connection method, you will be able to see your data
from your app.
15