Users Manual

NOTE: The default weight unit for CS20C is pounds (lbs). To change
the weight unit, you must download the Runcobo app and select the
desired weight unit in your app’s Settings menu (see page 34).
After inserting the batteries, your scale is ready to use. However,
without the Runcobo app you will only see your weight display on the
scale. You will need the app to see other measurements.
1. Place the scale on a hard, flat surface.
2. Step onto the scale to turn on the scale, then step off to let the scale
calibrate. Wait until you see the scale displays “CAL” and followed by
“00”, then step on the scale again to measure your weight.
3. Keep standing on the scale until the digits on the screen flash three
(3) times with your final measurement.
Weighing without the App
ϴ