8eZo¿9ecfei_j_ed¿IYWb[ Model: CS20C Questions or concerns? Contact support@runcobo.
Thank You. Thank you for purchasing the CS20C Smart Fitness Scale by Runcobo. We are dedicated to providing our customers with quality products for building a better living. Feel free to reach out to our helpful customer support team by email at support@runcobo.com or 1-866-786-5988.
Table of Contents Safety Information 4 Settings Scale Overview 6 Connect to Other Fitness Apps Setup Scale 7 Apple Health Insert Batteries 7 Google Fit Weighing without the App 8 Fitbit 3 Maintenance Measurements 1 Troubleshooting Using Runcobo Mobile App 1 Frequently Asked Questions Setup Runcobo Mobile App 9 View Reports 2 Specifications Delete Measurement Data 2 Warranty Show Progress 2 Customer Support Add/Delete Users 2
Safety Information IMPORTANT: Please read and comply with all of the instructions and warnings provided in this manual before using the product. Failure to comply with the instructions and warnings provided herein may result in inaccurate results and/or damage to the product itself. General Safety • Do not use if you have a pacemaker, artificial lung, an ECG, or any other internal medical devices.
Use & Care • This scale is not intended for commercial use. • Always place the scale on a hard, flat surface before measurement. • To weigh safely and accurately, stand with your feet shoulder-width apart while on the scale. • DO NOT strike or drop the scale. • DO NOT stand on the edge of the scale or jump on it. • DO NOT stand on the scale for a prolonged period of time. • DO NOT store or operate near heat sources or in humid environments. • Handle the scale with care, as it is a precision instrument.
Scale Overview 1. Weighing Platform 3. Anti-skid Padding 2. Display 4.
Setup Scale Insert Batteries Open the battery compartment and install the batteries under the correct polarity and replace the battery compartment cover. 1.5v - AAA 1.5v - AAA 1.5v - AAA Slide 1.
Weighing without the App After inserting the batteries, your scale is ready to use. However, without the Runcobo app you will only see your weight display on the scale. You will need the app to see other measurements. 1. Place the scale on a hard, flat surface. 2. Step onto the scale to turn on the scale, then step off to let the scale calibrate. Wait until you see the scale displays “CAL” and followed by “00”, then step on the scale again to measure your weight. 3.
Setup Runcobo Mobile App After setting up your scale, you need to setup your Runcobo mobile app. Without the app you can only see your current weight display on the scale. You don’t see your body compositions measurements. You cannot track your history either. With the Runcobo mobile app, you will have full access to all the measurements from the CS20C scale. All the measurements will display on your mobile app. The mobile app provides easy tracking of your weight history and many more features.
Setup App with Bluetooth Connections This section describes how to setup your app account and connect to your scale through Bluetooth connections. By the end of this section you will have your measurement. 1. Download and install the Runcobo mobile app. You can search from Apple App Store (iOS app) or from Google Play (Android app). To download the app, you can scan the QR code below.
2. Turn on Bluetooth on your smartphone. 3. Sign up and log in. a. Enter your email b. Select a proper password c. Tap the “Next” button NOTE: For Android users, Location and Bluetooth must be turned on for Android 6.0 and higher. The Google/Android’s implementations related to Bluetooth LE technology requires location permissions to be granted in order to scan Bluetooth devices.
4. Enter your personal Profile. a. Name b. Gender c. Birth Date d. Height e. Athlete Mode (Most users shouldn’t use the Athlete Mode. Select the Athlete Mode if you have strong muscles. As a rule of thumb, use the Athlete Mode if you work out intensively more than 12 hours a week and your resting heart rate is less than 60 beats per minute.) f.
5. Choose device. Tap the “smart body fat scale” on the screen. The app will change from the “Choose device” to the “Paring your device” screen. This screen may list other devices detected by the Runcobo app. Don’t tap other devices. smart body fat scale If you tap the “Enter the homepage” button at the bottom, you will go to the app “Measurements” screen. Continue next on Steps 6 & 7, but you won’t see Step 8.
6. Place the scale on a hard, flat surface. 7. Step onto the scale to turn on the scale, then step off to let the scale calibrate. Wait until you see the scale displays “CAL” and followed by “00”, then step on the scale again to measure. 8. Now on your app, on the “Paring your device” screen, a scale icon named “CS20C” should appear, tap this icon to pair the scale to your app. This screen may show other scales detected by the Runcobo app. Don’t tap other scales.
9. Keep standing on the scale for 5-10 seconds while the scale uploading the measurement data to your app. On the scale you may notice that your weight will flash 2-3 times. 28.
Measurements In this section, measurements refer to full measurements with a user’s Runcobo app already setup. Measurements with Bluetooth Connections When measuring with your Runcobo app open, the Bluetooth connection will be used. Your measurement data will be sent to your app through the Bluetooth. 1. Make sure your phone’s Bluetooth is on. Login to your Runcobo app. 2. Step onto the scale to turn on the scale, then step off to let the scale calibrate.
4. If you didn’t login to your Runcobo app (or your Bluetooth is disabled, or your phone is too far away from your scale), the Bluetooth connection will not be established. The measurement data will be stored in the scale temporally. The data will be uploaded to your app next time a Bluetooth connection is established.
4. The server recognizes you based on your existing measurements. So, when you open your app, your measurements will be loaded to your account automatically. The server will also list those unknown data, not recognized as yours, and ask you to assign to yourself if these are yours. You need to select the data and tap either “Assign” button or “Delete” button.
Using Runcobo Mobile App The Runcobo mobile app provides many functions. You can view your weight, BMI, body fat, muscle mass, water weight, etc. You can achieve your weight loss goals by tracking your progress. You can share your stats or progresses on social media. You can sync your data with other popular apps like Apple Health, Google Fit, Fitbit, etc. This document describes main functionalities of the Runcobo app. It is not intended to cover all of the app’s features.
View Reports 1.Tap “Trends” to view your progress history. You can select your progress for the week, month, or year.
Delete Measurement Data You can delete your measurement data. Please follow the instructions here. 1. Tap “Trends” you will see your data charts. 2. To go to the calendar, tap the “ top right corner of the screen.
3. On your “History” screen. Use arrows to go to your selected date. Tap on this date on the calendar. The measurement data for this date will be listed underneath the calendar. Tap “Select Data” (top right corner) to select a data you want to delete, then tap the garbage icon can (bottom right corner) to delete. 4. On this “History” screen, you can also select a data to share on Facebook, Instagram, text message, or others.
Show Progress You can show your weight loss progress by comparing your latest measurements with your earlier measurements. You can select any data to compare. 1. To select a data to compare, on your “Measurements” screen tap the block below the circle with your weight displayed.
2. On your “History” screen. Select a date and then select the desired data you want to compare. Then it will go back to your “Measurements” screen, displaying the comparisons against the data you just selected. If you don’t make any selections, the default comparison setting is to compare to your earliest measurements you made. If your reference data set is deleted, you will compare with your default data. No comparison if you only have one set of measurements.
Add/Delete Users 1. On the “Measurements” screen, tap “My Account” at the bottom of the screen.
2. To add new users, tap “Add a member”. Ϯϲ 3. To delete a user, swipe left on the account that you want to delete and tap ”Delete“.
Settings 1. To access the Settings menu tap “My Account”. 2. Tap “Settings”. 3. On the Settings menu, you can change the app theme, set weight goals, change weight units, select sound mode, or select languages.
Connect with Other Fitness Apps Apple Health 1. Open the Health App on your iPhone then tap “Sources”. Be sure to turn on your Bluetooth setting. 2. Select “Runcobo” from the list. 3. Turn on all categories to allow the Runcobo app to write data.
Google Fit 1. On your Runcobo app, access the Settings menu by tapping “Settings”. Select “Google Fit” from the menu. 2. Turn on Google Fit, then sign into your Google Account. You will automatically be redirected to the Google Fit page.
3. After successfully connecting, your weight data will sync with Google Fit. 128.
Fitbit 1. On your Runcobo app, access the Settings menu by tapping “Settings” . Select “Fitbit” from the menu. 2. Turn on Fitbit, then sign into your Fitbit account.
3. Tap “Allow” to access the Fitbit app. 4. After successfully connecting, your data will sync to the Fitbit app. You will be able to view your progress both on the app as well as online. 128.4 lb Allow ϯϮ 21.
Maintenance Recalibrating the Scale If the scale has been moved or flipped upside down, it must be recalibrated to ensure accurate results. 1. Place the scale on a hard, flat surface. 2. Step on the scale with one foot until the display until the digits appear on the display, then, step off. 3. The scale will show “CAL” then “0.00”, indicating that the calibration process is complete.
Battery Replacement The display will show “Lo” when the batteries need to be replaced. 1. Open the battery compartment on the back of the scale. 2. Remove the old batteries and dispose of them properly. 1.5v - AAA 1.5v - AAA 1.5v - AAA 1.5v - AAA ϯϰ 3. Install four new 1.5V AAA batteries, make sure the positive and negative ends are facing the correct direction, as shown below. 4. Replace the battery compartment cover. NOTE: The scale may need to be recalibrated after replacing the batteries.
Troubleshooting Bluetooth connection /P Connection Change Battery Overload Calibrating Open App Data transfer failed Data transfer successed Configure network failure ϯϱ
Frequently Asked Questions 1. Why doesn’t the scale work? • Check if the batteries are properly installed. 2. Why does the data flash on the screen and then disappear? • The batteries are low and may need to be replaced. 3. Why doesn’t the scale connect with the Runcobo app? • Make sure your phone’s operating system is running on iOS 8.0 or above, or Android 4.3 or above. • Download and open the newest version of the Runcobo app.
Specifications Weight Capacity 396 lb / 180kg / 28st Graduation 0.2 lb (0.05 kg) Weight Units lb / kg / st Platform Tempered glass Battery 4 x 1.5V AAA batteries Dimensions 12.2” x 12.2” x 1.
This warranty does not apply to the following: Warranty Product Default Warranty Period CS20C Smart Fitness Scale 1 year(s) For your own reference, we strongly recommend that you record your Order Number and date of purchase. Retail Store Order Number Date of Purchase Terms & Policy Runcobo warrants all products to be of the highest quality in material, craftsmanship, and service. effective starting from the date of purchase.
Customer Support Do you have questions? LET US HELP! If you encounter any issues or have any questions regarding your scale product, feel free to contact our Customer Support Team. Your satisfaction is our goal ! Customer Support Yolanda Corporation 1-866-786-5988 support@runcobo.com www.runcobo.
This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Connect with us @runcobo.
