User's Manual

01
Notice!!!
Notice!!!
1. Never use chemicals, such as record sprays, anti-static sprays, benzene or thinners to clean
the CD. These chemicals can damage the disc surface permanently.
2. To avoid serious scratches on CD, keep them in the cases after each use. Scratches can
cause the laser pick-up skip in the future play. Do not place stickers or write anything on the
disc.
3. Never touch the laser of the device. Always use the dust cover to prevent dust from collecting
on the laser.
4. If the device is unable to scan discs properly, use a standard commercially available cleaner
to clean the laser optics. Other cleaning methods may damage the laser optics.
Malfunction Possible reason Solution
Device not
working
Device does not plug fully inserted
into power outlet
Fully insert device plug into power
Unable to play
Disk not properly placed
Incompatibility issue Replace to other compatible disk
No sound
output
Wrong operation
Low volume
Sound stuck
Disk or laser lenses get dirty
Disk got scratched or curved
Remote does
not work
The insulation sheet is not removed
battery slot.
The remote is out of power Check if the remote battery is running out
The remote is too far from the CD
player
Make sure the remote is in the range of a reasonable
distance (within 6 meters)
Noisy and
screaming
when it plays
Usage me of the disk may be too
long, so the disk is not smooth
Make sure the disc is not heavily scratched or
damaged; Wipe the disc gently from the center
radically out to the edge with a clean & so cloth;
Try another new disc to check if the disc is faulty
If there is a "Jiji" sound inside the
earphone, it may be caused by
scratching of the disc
Please change to another disc, and do not use the
old one again to prevent the player from damage
02 03 04 05
06 07 08 09 10
11 12 13 14 15
16 17 18 19 20
21 22 23 24 25
26 27 28 29 30