User's Manual

Installation instructions:

Quick Start

MODE

1. Remove insulation sheet before using.

2. Plug in the USB cable to the adapter.

3. Plug the adapter into power outlet. (110-220V)

4. Insert a disc (format: CD, CD-R, CD-RM, MP3, WMA, WAV) into the CD player and pull the

power cable to power it on.

5. The display shows the status of reading the disc (DISC flashes). It will be played music after

the disc is rotated (5-10S).

6. Press the MODE button or Use the remote control to switch among functions: “CD”,

“USB/TF”, “AUX”, “FM”,and “Bluetooth”

7. Press the standby button of remote control will show the time, and it can be set up.

8. Pull the power cable again to power off the cd player.

There are CD mode, USB/TF mode, FM mode, AUX mode, Bluetooth mode; the display will light

up the corresponding mode symbol when switching modes.

①CD mode

*CD format support: CD, CD-R, CD-RM, MP3, WMA, WAV

Press the mode button or the CD button on the remote to switch to CD mode;

the Compact Disk will run automatically, the CD icon will appear on the screen.

②USB/TF Card Mode Instructions

Plug in a U-disk/TF Card to the CD Player USB port/TF Card slot.

Press the mode button or the USB/TF Card button on remote control to switch to USB/TF mode;

the device would automatically read files from USB flash drive/TF Card.

③FM Mode Instructions:

*FM Radio Range: 87.5MHz-108.0MHz

Press the mode button or the FM button on the remote to switch to the FM mode.

Press the PREV/NEXT button again to enter the automatic search state, and it will automatically

①

②

③

Fix the wall-mounted plate on the wall with the included 3 nails

Or fix it on the wall with the included 4 screws

Hang the CD Player on the wall-mounted pl

02 03 04 05

06 07 08 09 10

11 12 13 14 15

16 17 18 19 20

21 22 23 24 25

26 27 28 29 30