Product Description

ManualsBrandsShenzhen Yinuo-link Technology ManualsComputers & AccessoriesHIGH POWER WIRELESS ROUTER

Shenzhen Yinuo-Link Technology Co.,LtdYN-AR41AP

High Power Wireless Router

Model: YN-AR41AP

Product Description

The YN-AR41AP is a high powerwireless router, it is support 802.11N and

transmission rate up to 300Mbps. It can be suitable for complex environments such

as automation equipment, intelligent monitoring, environmental monitoring, wind

power generation and so on.

Product Feature

1. Comply with IEEE802.11N, IEEE802.11G/B,

2. Industrial grade design, more stable performance, wirelesstransmission rate up to

300M

3. WAN port support POE power supply (24-48V)

4. Support Open-Wrt third-party firmware and secondary development, so the system

can be customized flexibly

5. Support multiple wireless network types: AP mode and route relay

Product Specification

Protocol

IEEE802.11N/G/B

Chipset

AR9341/600MHz

Memory

64MB

FLASH

8MB, can be extend to 16MB

Wireless Rate

2T2R:300Mbps

Working Frequency

2.4Ghz

Interfaces

Support 1 of 10/100M adaptive WAN PHY interface, support automatic flip

（Auto MDI/MDIX）

Support 4 of 10/100M adaptive LAN PHY interfaces, support automatic flip

（

Auto MDI/MDIX

）

Max.Power Consumption

<8W

Dimension

132X88X18MM

Working Environment

Operating Temperature

：

-40

℃

-75

℃；

Storage Temperature：-40 ℃-100 ℃；

Working Humidity：10%-90% RH no condense；

Storage humidity

：

5%-90% RH no condense

Sensitivity

G mode

11N HT20

11N HT40

OFDM 6Mbps≤-89

MCS0/8≤-83

MCS0/8≤-80

OFDM 9Mbps≤-88 MCS1/9≤-80 MCS1/9≤-77

OFDM 12Mbps≤-85 MCS2/10≤-78 MCS2/10≤-75

OFDM 18Mbps≤-83 MCS3/11≤-75 MCS3/11≤-72

OFDM 24Mbps≤-80 MCS4/12≤-71 MCS4/12≤-68

Summary of content (11 pages)

PAGE 1
Shenzhen Yinuo-Link Technology Co.,LtdYN-AR41AP High Power Wireless Router Model: YN-AR41AP Product Description The YN-AR41AP is a high powerwireless router, it is support 802.11N and transmission rate up to 300Mbps. It can be suitable for complex environments such as automation equipment, intelligent monitoring, environmental monitoring, wind power generation and so on. Product Feature 1. Comply with IEEE802.11N, IEEE802.11G/B, 2.
PAGE 2
Shenzhen Yinuo-Link Technology Co.,LtdYN-AR41AP Wireless Security OFDM 36Mbps≤-75 MCS5/13≤-67 MCS5/13≤-64 OFDM 48Mbps≤-71 MCS6/14≤-66 MCS6/14≤-63 OFDM 54Mbps≤-70 MCS7/15≤-65 MCS7/15≤-62 Wireless safety function switch； 64/128/152 bit WEP encryption； WPA-PSK/WPA2-PSK,WPA/WPA2security mechanism； WPS fast security settings Support AP, router, relay, 4G function and so on.
PAGE 3
Shenzhen Yinuo-Link Technology Co.
PAGE 4
Shenzhen Yinuo-Link Technology Co.
PAGE 5
Shenzhen Yinuo-Link Technology Co.,LtdYN-AR41AP Antenna The EUT antenna is External antenna, The antenna can be removed, Unconventional interface, Antenna A gain: 5dBi, Antenna B gain: 5dBi, Dual antenna design only supports MIMO mode in802.11n(20) and 802.
PAGE 6
Shenzhen Yinuo-Link Technology Co.,LtdYN-AR41AP Product Applications Intelligent Transportation: 1. HD electronic bayonet application 2. HD electronic police application 3. Road wireless video SurveillanceVehicle monitoring: 1. Bus wireless video surveillance 2. Taxi video surveillance 3. Bus video surveillance Security monitoring: 1. Security wireless mobile detection system 2. Security wireless video surveillance Industrial monitoring: 1. Site wireless video surveillance 2.
PAGE 7
Shenzhen Yinuo-Link Technology Co.,LtdYN-AR41AP FCC WARNING FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
PAGE 8
Shenzhen Yinuo-Link Technology Co.,LtdYN-AR41AP Requirement per KDB996369 D03 2.2 List of applicable FCC rules List the FCC rules that are applicable to the modular transmitter. These are the rules that specifically establish the bands of operation, the power, spurious emissions, and operating fundamental frequencies. DO NOT list compliance to unintentional-radiator rules (Part 15 Subpart B) since that is not a condition of a module grant that is extended to a host manufacturer. See also Section 2.
PAGE 9
Shenzhen Yinuo-Link Technology Co.,LtdYN-AR41AP module, a Class II permissive change is required on the module grant to register the additional host as a specific host also approved with the module. Explanation: The module is a single module. 2.5 Trace antenna designs For a modular transmitter with trace antenna designs, see the guidance in Question 11 of KDB Publication 996369 D02 FAQ – Modules for Micro-Strip Antennas and traces.
PAGE 10
Shenzhen Yinuo-Link Technology Co.,LtdYN-AR41AP Explanation: This module complies with FCC RF radiation exposure limits set forth for an uncontrolled environment, This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body." This module is designed to comply with the FCC statement, FCC ID is: 2APT7AR41AP. 2.7 Antennas A list of antennas included in the application for certification must be provided in the instructions.
PAGE 11
Shenzhen Yinuo-Link Technology Co.,LtdYN-AR41AP Explanation: Yinuo-link can increase the utility of our modular transmitters by providing instructions that simulates or characterizes a connection by enabling a transmitter. 2.10 Additional testing, Part 15 Subpart B disclaimer The grantee should include a statement that the modular transmitter is only FCC authorized for the specific rule parts (i.e.