Level 2 EV Charger User manual Version: V1.
CONTENT 1 Warranty 2 Safety and Warning 3 Introduction 3.1 Product Technical Specifications 3.2 External Structure 3.3 Package Contents 4 Configuration and Operation 4.1 Power-on Checking 4.2 Start and stop charging station L1/L2/L3 by APP(Bluetooth) 5 Set up and update 5.1 Mode setting for maximum charging current 5.2 External enabling/disabling of the Wallbox 5.3 Firmware version upgrade 6 Troubleshooting 6.1 Indicator Status 6.
Warranty Shenzhen YingLi Technologies Co., Ltd. (Hereinafter “YingLi”) warrants that Products supplied to Customer pursuant to this Agreement/Contract shall be of merchantable quality and shall meet all applicable safety standards and free from any defect of design, material and workmanship within the warranty period. The warranty period is Twenty-four (24) months since from the delivery date.
1 Safety and Warning Save these instructions. Read all instruction before installing or using the charger. 1）Keep the charger away from explosive or flammable materials, chemicals, vapors and other hazard objects. 2）Keep the charger socket clean and dry. If it gets dirty, please wipe it with clean dry cloth. 3）Touching the socket core is strictly forbidden when power on. 4）Do not use the charger in case of any device defects, crack, abrasion, bare leakage and so on.
2 Introduction 2.1 Product Technical Specifications Model YLEV50A-L3 YLEV40A-L2 YLEV32A-L1 Charging capacity Up to 7KW Up to 11KW Up to 22KW Input/Output power 230VAC±20%-50/60Hz32A-1phase 400VAC±20%-50/60Hz16A-3phase 400VAC±20%-50/60Hz32A-3phase Technical features RCD 30Ma RCD Type A and DC 6Ma RCD function Standby power <3W Measuring accuracy 1% Communication Bluetooth/WIFI(Optional) APP User interface LED/LCD(3.
2.2 External Structure 2.3 Package Contents Unpack the product. Please check and verify following items after receiving the charger : Visual inspection on charger’s external appearance. If there is any breakage or other damage,please notify the seller immediately. Check type and quantity of all accessories as follows. If there is a shortage in the quantity of any item or if any items are missing, please contact the seller at once.
3 Operation Instruction 3.
3.2 Installation Process 1) Installation Notice Electrical devices should only be installed, operated, and maintained by qualified personnel. No responsibility is assumed by the manufacturer for any consequences arising out of the use of this device. A qualified person is one who has certified skills and knowledge related to the construction, installation and operation of this type of electrical device and who has received safety training to recognize and avoid the hazards involved.
2. Install expansion bolts(3*M6*60MM) 3. Open the cover with the key,fix the charging station with self=tapping screws(3*M5*50mm) 4. Use a cable with a size of 3*6mm²(7KW) to connect to the input terminal of the charging station, from left to right,R S T N and GND wire, and then tighten the screw with a screwdriver.
5. Use a cable with a size of 5*4mm²(11KW)or 5*6mm²(22KW) to connect to the input terminal of the charging station, from left to right,R S T N and GND wire, and then tighten the screw with a screwdriver. 6.
7.
4 Configuration and Operation 4.1 Power-on Checking Please check / re-check the following items prior to initial Power-on : The charger’s location allows good operational access to normal use and repair & maintenance. The AC input components within the premise’s power supply are fitted correctly with required protection items prior to installation of the charger. Double confirm the charger is installed properly. No components or other items have been left on the top of the charger.
4.
Step 3-Connect the wallbox Click Note: 1,The number is the charging station number that at the bottom right of the LCD display. 2,The initial password is 123456. After the device is successfully connected, the password can be changed. Note: 1, Make sure there is a display (connectable) behind the device number. 2, Click on the device number, wait for about 10S to enter the next interface.
Step 4-Connect your ev car with the charger gun and start charging 15
Step 5-Modify the charging station key L1/L2/L3 by APP(Bluetooth) Click Note: If you forget the modified device password, you can repeatedly quickly press the emergency stop button on the right side of the charging station 4 times (press it down and reset clockwise once, and it will be completed within 3 seconds) to restore the factory settings password.
Step 5-Start charging at the appointment time L1/L2/L3 by APP(Bluetooth) 1Click 3Click 2Click Note: 1. Click the set time button and select the time to start charging. 2. Click the button to start charging, and confirm to start charging at a predetermined time.
Step 6-Load balancing setting L1/L2/L3 by APP(Bluetooth) Load balancing needs a power-sampling device on the incoming mains supply cables, which could be a power meter or a current transducer and normally located in the meter box.
Step 7-Charging history view L1/L2/L3 by APP(Bluetooth) Click By viewing the charging history, you can clearly understand the daily or monthly charging time and charge level of your charging station.
5 Set up and update 5.1 Mode setting for maximum charging current （Only for 22KW） 5.2 External enabling/disabling of the Wallbox The Wallbox can be set to plug and play charging, dial the code switch No. 1 upwards as shown in the picture on the left 5.3 Firmware version upgrade This product can update the firmware software of the product through the Micro SD Card.
6 Troubleshooting 6.1 Indicator Status What you see What it means What to do LED ring off or green L1/L2/L3 is ready for use. Plug L1/L2/L3 charging cable i the car nto LED ring green breathing L1/L2/L3 is charging the car The car is charging. LED ring green The car is fully charged. Unplug charging cable from your car and place the charging cable back into L1/L2/L3 cable holder. LED ring red L1/L2/L3 is experiencing an error Check the troubleshooting chapter in this manual for solutions.
6.2 Fault Code and Resolution(LCD display) Display indication When a problem occurs, error messages are often shown on the display. With this information you can quickly identify and investigate the problem.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
