User's Manual

Step 1:

Attach stabilizers ( Rear and Front ) to Frame.

Tools : Hex tool Hardware : Dismantled bolts in terms of spring and ﬂat washers

0807

ASSEMBLY

1. Dismantle screws in terms of spring and flat washers with hex tool.

2. Discard the removed stabilized tubes, keep rest of bolts in terms of spring and

flat washers.

Before Assembly

3. Snipped the nylon ties and wrapped wooden wedges(Refer to arrow G).

4. Take out 4pcs wooden blocks (Refer to arrow H ), which used for relieve Fly wheel

wobble during transportation.