Kardio T2S Spin Bike USER MANUAL IMPORTANT: Read all instructions carefully before using this product. Retain this owner’s manual for future reference. The specifications of this product may vary from this photo, subject to change without notice. Manufacturer: Shenzhen Yile Dynamic Technology Co., LTD. Address:131, Shahe Xili, 2-2 Xili North Road, Licheng Community, Xili Street,Nanshan District, Shenzhen City, China Version: 1.0 MADE IN CHINA Model.
TABLE OF CONTENTS 01 Customer Serivce 02 Important Safety Guidelines 03 Specifications 04 Parts List 05 Accessories & Tools 06 Assembly 07 Before You Start 08 Operation 09 Trouble Shooting 10 Warranty
1 CUSTOMER SERIVCE 2 IMPORTANT SAFETY GUIDELINES IMPORTANT: FOR UREVO ONLY Read all instructions before using this appliance. 10 To disconnect, turn all controls to the position, then remove plug form outlet.
FCC STATEMENT： Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment should be installed and operated with minimum distance 20cm between the radiator& your body.
4 5 PARTS LIST 13 ACCESSORIES & TOOLS Accessories 1 A 2 12 Screw M6*15 X 2 Washer Φ6 X 2 Standard Elastic Washer X 2 3 Big Washer Φ10 1pc 4 11 10 B Bolt M6*15 X 4 Washer Φ6 X 4 Standard Elastic Washer X 4 Seat Adjustment Lever 5 9 Tools 8 6 7 Item 1 2 3 4 5 6 7 05 Qty 1 1 1 1 1 1 1 Description Seat Seat slide lever Seat Adjustment Lever Seat post Petal, Left Stabilizer, Rear AC Adaptor Item 8 9 10 11 12 13 Qty 1 1 1 1 1 1 Description Frame Stabilizer, Front Petal, Right Handlebar Pos
ASSEMBLY Step 1: Attach stabilizers ( Rear and Front ) to Frame. Tools : Hex tool Hardware : Dismantled bolts in terms of spring and flat washers Before Assembly 1. Dismantle screws in terms of spring and flat washers with hex tool. 2. Discard the removed stabilized tubes, keep rest of bolts in terms of spring and flat washers. X4 A 6 3. Snipped the nylon ties and wrapped wooden wedges(Refer to arrow G). 4.
Step 2: Step 3: Attach Petals (Right and Left) to Frame Assembly. Tools : Allen Wrench Flat Wrench 1 Install Seat on Seat Slider. Attach Seat Assembly to Seat Post. If the threads strip due to improper installation or incoming Petals defective , the Petals can disengage from the bike and /or break while under usage , which can causes in serious injury to user. NOTICE : Left petal is reverse- threaded and the Petals have labeled “ L “ OR “ R” for distinguish.
Step 4: Step 5: 1 Attach Handlebar to Handlebar Post. Tools: Hex Tool Hardware: Bolt 4pcs (B); Spring Washer 4pcs; Washer 4pcs Attach AC Adaptor to Frame. Before plug in AC adaptor to power outlet, exercise bike MUST switch to Work mode by a 1/4 rotate emergency brake turn anti-clockwise. NOTICE : Data log connectors are engaged properly before insert Handlebar into Handlebar Post, then tight fix screws with Hex Tool.
7 BEFORE YOU START Moving and Storing the Machine - Remove water bottle from rack - To lock flywheel by push and 1/4 rotate emergency brake turn clockwise - Pull handlebar toward you and push exercise bike to your desired location,where far away from children and pets . Be carefully when bike transportation ,for safe storage of bike, you MUST to remove AC adaptor and place in a secure location, Tighten emergency brake as described untill flywheel is locked.
Console Feature and Control Instruction 3. Connectivity exercise bike to your device. Searching device Connecting Connection succeed Item Description Corresponding indicator Rpm The RPM display field shows the current average revolutions per minute (RPM). / Level The LEVEL display field shows the current resistance level. The range of resistance is 1 - 16 which can be modified by 1 increments. / Time The TIME display field shows the time from start to finish of workout.
Emergency stop Handlebar Adjustment To stop the petals immediately ,push down hard on the emergency brake. Do not get down from bike untill the petals have come to a complete stop. Be aware that the moving pedals can strike legs. Up and down adjustment Loosen (anti-clockwise) handlebar adjustment lever, then firm grasp handlebar to Push / Pull handlebar post untill your desired height and tighten ( clockwise ). Do not lift Seat Post/ Handlebar above “ Max “scale.
9 TROUBLE SHOTING Condition/Problem No display/partial display/ unit will not turn on Exercise bike wobble does not sit level Pedals loose/unit difficult to pedal/ Pedals seem to skip or slip Clicking sound when pedaling Seat post movement Things to Check Solution Check adaptor connection with electrical (wall) outlet Make sure adaptor is plugged into a functioning wall outlet. Check connection at front of unit Connection should be secure and undamaged.
