User Manual

3W(Max) Integrated
Apple Watch Charger
5W(Max) Wireless
Charging Tray for
AirPods
LED Charging Indicator
(Automatically turns off after 20 seconds.)
Thank you for purchasing the Our 3-in-1 Magnetic
Wireless Charger (M6).Read this manual carefully
before use, and retain it for future reference.
3 in 1 Magnetic Wireless Charging Station
Specification:
Product interface: type-C
Material: ABS+Stainless steel
Input : 9V 2A 12V 1.5A
Apple watch output power: 3W(Max)
Airpods charging power: 5W(Max)
Apple phone charging power: 10W(Max)
Product color: black/white
Compatible Devices:
·iPhone 14/13/12 mini/Plus/Pro/Promax
·Apple Watch 8/Ultra/SE 2/7/6/SE/5/4/3/2.
·AirPods 2/3/Pro/Pro 2
Product Overview1
10W(Max) Wireless Charging
Optimized for iPhone
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two
conditions:
(1) this device may not cause harmful interference, and (2) this device
must accept
any interference received, including interference that may cause
undesired operation.
Any changes or modifications not expressly approved by the party
responsible for compliance
could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide
reasonable protection against harmful interference in a residential
installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television
reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to
correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This
equipment should be
installed and operated with minimum distance between 20cm the radiator
your body: Use
only the supplied antenna.
This device was tested for typical mobile type device operations.
To comply with R F exposure
requirements, a minimum separation distance of 20cm must be
maintained between the user’s body and the handset, including
the antenna. Third party belt clips, holsters, and
similar accessories used by this device should not contain any
metallic components. mobile
type device accessories that do not meet theserequirements may
not comply with RF exposure requirements and should be
avoided. Use only the supplied or an approved antenna.
This device in compliance with the essential requirements and
other relevant provisions of
Radio Equipment Directive (RED) SI 2017 No.1206. All essential
radio test suites have been carried out.
1. The device complies with RF specifications when the device
used at 20cm form your body