User Manual

12
Note ˖ Disconnect the USB cable when the device has been charged for about 2
hours.
8ˊ
ˊ
LED indicator: LED is on during charging and will be off when battery has
been fully charged; and it will blink when the battery is low.
Note
˖ Please use the dedicated USB cable provided together with this pen to
connect the Receiver and the pen.
How to Use the Smart Pen
WARNING:
Do not attempt to open the pen. This may cause the
pen to malfunction.
1. Install Refill and Receiver
1) Inserting an Ink Refill into the Pen
Note: Make sure you use a refill that is similar to the original (Standard metal
refill: Φ2.35mm*67.0mm).
2) Taking out the refill with the extractor
a. Remove the cap off the pen.
b. Use the extractor to hold the refill.
c. Slightly pull the old refill out.
d. Insert a new refill inside the pen.
a. Slide the new refill into the tip of
the pen.
b. Gently press the new refill until it
is lodged securely in place.