Ც㜭ㅄ ⭘ᡧ Smart Pen User Manual Model: XN690
Accessories ● Receiver ● Ink Refill ● Mini USB Cable ● Refill Extractor ● Smart Pen ● User Manual Overview of Receiver Receiver 5 1 2 3 4 6 1. 2. 3. 4. 5. 6. Reset hole- Reset and shut off the device with a needle penetrating inside for about 3 seconds. Clip-Clipthe A4 paper(default writing area). Display- Indicates the current working status. BlueTooth Connection Power button- Press briefly to turn on the device and press and hold for 3s to power off the device.
Note˖Disconnect the USB cable when the device has been charged for about 2 hours. ˊLED indicator: LED is on during charging and will be off when battery has 8ˊ been fully charged; and it will blink when the battery is low. Note˖Please use the dedicated USB cable provided together with this pen to connect the Receiver and the pen. How to Use the Smart Pen WARNING: Do not attempt to open the pen. This may cause the pen to malfunction. 1.
3) Fix the receiver onto paper. Clip the receiver on the top-center of A4 size paper. Hold the pen and write as usual. 2. Application MemoPlus and NoteTaker 1) Function Description The smart pen must be used together with the application MemoPlus on mobile devices and a Windows PC. It can capture the handwritten notes in JPEG format, and record the real-time writing process as a video clip that can be shared to your social networks.
3. How to use application MemoPlus or Notetaker 3.1 Use MemoPlus on mobile devices 1) Open App Find the App “MemoPlus”on your smart phone, and tap the icon to open it, then it will enter the following interface. 2) Configuration &Connection Connect the receiver and your smart device via BT. This smart pen can be connected to your Android or iOS device via BT˖ a. Turn on the BT connection respectively on your smart device and the receiver; b. Open the application MemoPlus on your smart device; c.
3) Writing & Recording After connectionˈenter the main interface, then you can create a new note by tapping on “Write Notes”; if you want to record the writing process of your note, press icon , and the video will be recorded in MP4 format. Main Interface Note: Setting Interface a. Do not block the signal transmission between the pen and the receiver when writing. b. Make sure the pen is at least 2cm away from the receiver so that the sensor can work normally. c.
Eraser˖Used to clean the calligraphy. Shapes˖Line, Rectangle (empty)ˈRectangle (filled)ˈCircle˄empty˅ˈCircles ˄filled˅. Image˖Import image from local memory, Get picture from camera and move the picture. Save˖Save current note as a screenshot. Upload: Upload notes to designated directory. Clear˖Clear off the note on current page. Delete˖Delete current page of note. / Previous/Next: Go to previous/ next page. / / Home page/End page: Shift to the Home / End page. Paper size: A4 / A5.
then click the “+” icon in the top left corner of the screen to create a new work page. c. View the icon to check whether the receiver has been connected to the PC successfully. If the red crossing icon “X” remains, it indicates the connection is not successful. Examine the USB connection until the icon turns into in the end. ˅Writing and Recording 3˅ Similar to the usage on the smart phones, you can use the smart pen on Windows PC freely as well with the program MemoPlus. a.
4˅Tool Bar description ˖Connection. The red cross “X” symbol indicates that the receiver has not been connected to the PC successfully; once the connection is successful, the cross “X” will disappear. ˖Pen mode, one work mode of the smart pen˗ ˖Mouse mode, the other work mode of the smart pen˗ Width type˖Fine, Medium and Wide. Ink Color˖Black, White, Red, Green, Blue and Yellow. Eraser˖Used to clean the calligraphy. Clear˖Clear off all the inks on current page. Import˖load images from local sources.
to decide where on your Mac’s hard drive you want to save your uploaded notes from the Digital Pen. Click on the NoteTaker Preferences icon to open the preference tool, and then specify the path to the location on your Mac’s hard drive where TIFF images from the Digital Pen will be saved. 2) Basic operation a. Use the Digital Pen to capture and save your notes while you are away from your Mac, in meetings or lectures. b. Connect the Digital Pen to your Mac to upload the saved notes.
a) Connect the device to MAC through USB cable. b) On the top-right bar, click c) Select “Spotlight Preference”, and then choose “Show and then input “ink”. All”. d) Click “Ink”. e) Set “Handwriting recognition” as “On” and select “Show ink in menu bar”. The ink icon should appear on the toolbar.
(4) Use the digital pen in applications such as iWork”08. You can write handwritten letters on-line, and the Mac will convert it into text. The feature is available iWork Pages (word processor), iWork Keynote (presentations) and iWork Numbers (spreadsheets). Note: The Digital Pen can be also used for drawings inside applications such as Adobe Illustrator, Photoshop, etc.
The interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of FCC Rules.
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. The device can be used in portable exposure condition without restriction.
