User's Manual

57
The pen is in Mouse
mode
1. Press the ON/OFF button
on the base unit to switch to
Pen mode(refer to the user
manual).
2. Set the pen as Pen mode
in Note Manager (refer to
the user manual).
The distance between
the pen and the base
unit is beyond the
area of A4 paper
Make sure the distance
between the pen and the
base unit is within the area
of A4 paper.
The digital pen's
battery is too low
Replace the pen's battery
There is barrier
between the pen and
the base unit.
Remove the barrier
Your handhold is so
close to the pen tip
that the transmitting at
the pen tip is blocked
by your finger.
Refer to the user manual for
instruction of correct
handhold
The battery of the pen
is too low
Replace the battery
Your writing is too
gentle.
Impose more strength on
your writing.
The pen stroke is
messy or
discontinuous.
The writing surface is
not smooth or the
paper is not spread
well.
Make the writing surface is
smooth
The pen's battery is
too low
Replace the battery
The pen is not in
Mouse mode
1.Press the ON/OFF button
on the base unit to switch to
the Mouse mode.(refer to
the user manual)
2.Set the pen as Mouse
mode in Note Manager(refer
to the user manual)
The mouse is dead
The distance between
the pen and the base
unit is beyond the
area of A4 paper.
Make sure the distance
between the pen and the
base unit is within the area
of A4 paper.
The orientation of the
pen strokes does not
match the actual
writing or drawing.
Setting your base unit
orientation as the
same to your actual
placement.
See "Setting your base unit
orientation preferences"
section in the user manual.