User's Manual

16
③ Exit the WiFi menu window of your Apple device.
Note：Repeat the 3 steps outlined on 2 above only when
setup is not successful or when the product has been relocated
to a new location and needing to repeat setup process. Do not
press on the “SET” button again, as it will clear previously
completed connection setup. It is necessary to connect
MT5650 with your Apple device in order to allow user to operate
on the touch panel of your Apple device for connecting
GLW_MT5650 with your office/home WiFi router to the World
Wide Web
.
The L/WAN LED signal will fast blink after action 2 is completed.
WiFi signal strength will effect the LED blinking speed, faster
speed indicates stronger WiFi signal. While weaker WiFi
signal will result in slower LED blinking speed.
3. Connect MT5650 to the Internet via APP:
At Apple device home menu, find the NetCamera APP icon
“
” and click on the APP to enter the Internet set up
menu (shown below) for MT5650-xxxxxx