User's Manual

13

3. Gateway setup - Dashboard Page
Once you have confirmed your email and signed in to the app you will need
to setup your gateway. Tap the orange gateway symbol to begin this process.
14

4. Gateway Setup - Gateway Discovery Page
To connect your gateway, first plug in the power cord to the gateway and
then use the provided network cable to plug the gateway into your home
internet router. After a short period of time you will see a solid green light on
the gateway showing it is ready, the gateway icon should change from grey to
colored at this point indicating that your gateway is ready to be registered and
used. Tap the icon to register your gateway.
If you do not see your gateway, tap the rescan button and check that your
gateway is powered on and plugged in to your router correctly.
15

5. Successful Gateway Registration Page
Once your gateway is registered and ready to be used you will see this
success page. You can now access your dashboard to see any devices that
may be connected to your gateway already by pressing the Star Icon on the
navigation wheel.
If your gateway did not come with any devices connected, then you can setup
your first device by pressing the button under the gateway image.
16

6. Find Devices Page
The find devices page lets you find and select the device you want to register
to your Nexturn device. You can power on all your devices at the same time
for registration, but it is recommended that you power on devices one at a
time.
Once you have powered on a device, you should tap the Find Devices button
and wait a short period of time while the gateway searches for your new
devices. Once the device is found it will show in the list in the middle of the
page. You can only select one device to setup and register at a time, so
select the device you want to start with from the list and then tap the register
button.