User's Manual

6
Bottom view
Charging Battery
The device has a built-in rechargeable battery. No extra battery installation is required.
Just charge the device when it indicates low battery.
To charge the battery, connect the device to any standard wall outlet via the DC-IN
port using the power adaptor. It takes about 5 hours to fully charge the battery. When
the battery is fully charged, the charge indicator at the left bottom should light up in
green. During charging, the indicator lights up in red.
Note:
a. You are strongly recommended to charge the battery immediately when the device indicates the
battery is lower than 15%!
b. You can operate the device even when it is being charged. But for extended battery life, it is suggested
NOT to use the device when it is charging.
c. It is recommended to charge the battery before you use the device for the first time.
d. For maximum performance, lithium-ion batteries need to be used often. If you don’t use the device
often, be sure to recharge the battery at least once per month.
e. Be sure to use only the dedicated power adaptor provided with the unit for charging.
Installing Memory Card
This device can read files directly from memory card.
a. VOL+/-
b. Power – long press to turn on or off the unit; short press switch between
standby mode and active mode.
c. ESC: Return
d. Menu: Display menu options.
e. Home: Go to the Home Screen.
f. SEARCH– Go to Google Search home page.
g. Built-in Camera Lens
h. Touch Screen
i. Built-in Speakers
j. MicroSD card Slot
k. Reset pin hole – reset your device if the device freezes.
l. DC-IN port – connects to any standard electric source through the provided
AC adaptor.
m. HDMI jack (optional)
n. Built-in Microphone –record your voice or any other sound.
o. USB Port
p. Earphone socket – connects to stereo earphones.
Note: DO NOT insert or remove the memory card when the device is working with
it. That may cause errors or other failures.
l m o p
n