User's Manual

h. Slide the WIFI toggle switch to “ON” to turn on WIFI.

i. Your tablet will scan automatically for available WiFi networks and display them

in the right panel. The list of available networks shows all the wireless networks

in the range of your device. Choose a network from the list and then tap

“Connect” to connect. Some network may be secured with password, enter the

password before connecting. If the connection is successful, the message

Connected to…(WiFi Network Name) will appear under the WIFI Setting.

Note:

a) The available network list is constantly refreshed automatically.

b) When the Wi-Fi is enabled, the device will connect automatically to your configured

networks when they are in range.

c) If the device detects a network that has never been configured, it will display a no-

tification icon.

Using 3G Dongle (optional)

Besides Wi-Fi connection, you can access internet by 3G dongle. Connect a 3G

dongle (not provided with the product) with the device through the USB host

cable(also not provided with the product), and then the 3G network is enabled with

3G network icon appearing at the bottom right of the screen. You can surf on the

Internet freely now. Please make sure the setting “Data enabled” under “Wireless

& network settings” Æ “Mobile networks” is checked before surfing.

Note

：

j. 1.The 3G Dongle device and the USB Host cable needed for this function are not included in

the accessories of the product, thus user have to purchase them from the market.

k. 2. The USB host cable can be used to connect the 3G Dongle or a U disk. When using 3G

Dongle, you need to disconnect WiFi network.

l. 3. This product support a 3G Dongle of most brands or types on the market

，

but considering

the compatibility of different types, you are still suggested to buy one only when you have

tested it OK