User's Manual

6
Charging Battery
The device has a built-in rechargeable battery. No extra battery installation is required.
Just charge the device when it indicates low battery.
You can charge the device in two ways: use the power adaptor or USB cable
connecting to PC. Charging the battery with the power adaptor is more efficient than
with the USB cable.
When connecting the adaptor via the DC-IN port for charging, plug it into any standard
wall outlet. The charge indicator should light red during charging, and should light
orange as the battery is fully charged.
If you don’t use the adaptor, you can also charge the device as long as you connect it
with a running PC.
Note:
a. You are strongly recommended to charge the battery immediately when the device indicates the battery
is lower than 15%!
b. For extended battery life, it is suggested NOT to use the device when it is charging.
c. Be sure to use only the dedicated power adaptor provided with the unit for charging.
Installing Memory Card
This device can read files directly from memory card.
To use a memory card, find the card slot on the device and then insert the memory
card into the slot in the correct orientation. To access the files stored in the memory
card, enter the File Explorer mode and select the “SD Card” directory.
Transferring Files
Sometimes you may need to transfer media files from a computer to the device.
(1) Connect the device to a computer with the supplied USB cable.
(2) Once the connection is done, you will be prompted to turn on USB storage. Tap
the button to turn it on. Two removable disks will appear upon you computer
standing for the flash memory and SD card of the device.
(3) Find an available removable disk for transferring files between the device and the
PC.
(4) Once the transference is done, tap to turn off the USB storage before
disconnecting the USB cable physically.
This device supports Bluetooth connection which provides you a second means of file
transference. To use this function,
(1) Turn on the Bluetooth connection following the directory: Settings\ Wireless and
Network \Bluetooth.
(2) The device will detect other Bluetooth devices available in range and list them.
(3) Match the device with another Bluetooth device.
(4) Now you can transfer files through Bluetooth connection.