User's Manual

(3) The device will scan automatically for available WiFi

networks and display them in the right panel. The list of

available networks shows all the wireless networks in

range of your device.

(4) Choose a network from the list and then tap “Connect” to

connect. Some network may be secured with password,

enter the password before connecting. If the connection is successful, the

message Connected to…(WiFi Network Name) will appear under the WIFI Setting.

Note:

1. The available network list is constantly refreshed automatically.

2. When the Wi-Fi is enabled, the device will connect automatically to your configured networks when they

are in range.

Using 3G Dongle

Besides Wi-Fi connection, you can access internet by 3G dongle. Connect a 3G

dongle (not provided with the product) to the device through the USB host

cable(not provided), and then the 3G network is enabled with 3G network icon

appearing at the bottom right of the screen. You can surf on the Internet freely

now.

Note

：

1.The 3G Dongle and the USB Host cable are not included in the accessories of the product, thus

user have to purchase them from the market.

2. When using 3G Dongle, you need to disconnect WiFi network.

3. This product supports a 3G Dongle of most brands or types on the market, but considering the

compatibility of different types, you are still suggested to buy one only when you have tested it OK.

Launching the Web browser

To launch the Web browser, you tap the Browser icon in the Home screen.

To display context menus, tap .

y You can scroll the screen up and down by tapping on the page and dragging it up

or down (be careful not to tap a link until you are ready!).

y To open a link, simply tap it.

y To go back to the previous page that you browsed, tap the Back icon .

y To display the available menu items, tap the Menu icon .