User's Manual

4
press the key to play the next track.
Switch Channel
Press the “+” or “-” key to switch the preset
channels. When you switch to a certain channel,
the frequency is indicated on the display.
Note: There are 13 preset channels: 88.1, 88.3, 88.5,
88.7, 88.9, 89.1, 106.7, 106.9, 107.1, 107.3, 107.5,
107.7, 107.9 MHz.
Adjust Volume
Press and hold the key to decrease volume,
or press and hold the
key to increase
volume.
[Play music on a removable disk]
1. Plug the USB flash disk that stores MP3 files into the USB port.
2. Insert the device into the cigarette lighter socket to draw 12 V DC power.
3. Press the “+” key or “-” key to select the preset channel without signal interference. You
see the selected frequency indicated on the display.
4. Tune the car FM radio to the same channel as indicated on the display.
5. Now you can enjoy your MP3/WMA music by controlling the keys on the device. For
detail information about operation, see “Basic Operation” section.
[Play music on a memory card]
This device can read audio files stored on a SD/MMC memory card, and transmit the audio
signals to a FM radio for your listening.
1. Plug a memory card that stores audio files into the card slot beside the USB port.
2. Insert the device into the cigarette lighter socket to draw 12 V DC power.
3. Press the “+” key or “-” key to select the preset channel without signal interference. You
see the selected frequency indicated on the display.
4. Tune the car FM radio to the same channel as indicated on the display.
5. Now you can enjoy your MP3/WMA music by controlling the keys on the device. For
detail information about playback operation, see “Basic Operation” section.
Note: If a removable disk and a memory card are both inserted properly, only the audio files on the
removable disk is transmitted and played.
[Play music on an extra audio player]
The device supports LINE-IN feature that enables you to enjoy the music from an external
audio device such as CD, MD player, etc. The external audio source comes into the device
through the line-in jack and is transmitted to the FM tuner by the built-in FM transmitter. You
enjoy the music through the FM stereo audio system.
1. Connect one end of the LINE-IN cable to the line-in jack of the device and connect the
other end to the earphone jack of the external audio device.
2. Turn on the external audio player and play the music.
3. Press the “+” key or “-” key to select the preset channel without signal interference.
You see the selected frequency indicated on the display.