User's Manual

5 Operations
5.1 Listening to music
O Use the USB flash disk as audio source
(1) Insert the cigar plug of car MP3 player into the car cigar socket to draw 12 V DC power.
(2) Plug the USB flash disk that stores MP3 files into the USB port.
(3) Press the “CH” key to select the preset channel without signal interference. You see the
selected frequency indicated on the display.
(4) Tune the car FM radio to the same channel as indicated on the display. Now you can enjoy
MP3/WMA music with excellent quality through the FM stereo audio set.
O LINE-IN Function
The device supports LINE-IN feature that enables you to enjoy the music from an external
audio device such as CD, MD player. The external audio source comes into the car MP3
player through the line-in jack and is transmitted to the car FM tuner by the built-in FM
transmitter. You enjoy the music through the FM stereo audio system.
To enjoy the music on the external audio device through the FM radio:
(1) Connect one end of the LINE-IN cable to the line-in jack of the car MP3 player and
connect the other end to the earphone jack of the external audio device.
(2) Turn on the external audio player and play the music.
(3) Press the “CH” key to select the preset channel without signal interference. You see
the selected frequency indicated on the display.
(4) Tune the car FM radio to the same channel as indicated on the display. Now you can
enjoy music with excellent quality through the FM stereo audio set.
5.2 Playback Control
O Play/Pause
Press the
key to play the MP3/WMA file on the USB flash disk. The frequency is indicated
on the display. To pause during playback, press the
key，the red LED stops flashing and is
steadily on. To resume, press it again.
O Previous/Next
Press the
key to play the previous track or press the key to play the next track.
O Switch Play Mode
This device provides two play modes: Normal and Random. You can switch the play modes by
pressing and holding the
key for a while.
During normal playback, the red LED flashes slowly. During random playback, the red LED
flashes quickly.
O Switch Channel
Press the “CH” key to switch between 12 preset channels. The 12 preset channels includes
88.1, 88.3, 88.5, 88.7, 88.9, 106.7, 106.9, 107.1, 107.3, 107.5, 107.7, 107.9 MHz. When you
switch to a certain channel, the frequency is indicated on the display.
O Adjust Volume
Press and hold the
key to decrease volume, or press and hold the key to increase
volume.
Note: When you use the LINE-IN function, the four keys except “CH” key are unavailable. You
listen to the music by operating the control keys on the external audio player.