User's Manual

- 4 -
[Play music on a memory card]
This device can read audio files stored on a SD/MMC memory card, and
transmit the audio signals to a FM radio for your listening.
1. Plug a memory card that stores audio files into the card slot beside
the USB port.
2. Insert the device into the cigarette lighter socket to draw 12 V DC
power.
3. Press the “+” key or “-” key to select the preset channel without
signal interference. You see the selected frequency indicated on the
display.
4. Tune the car FM radio to the same channel as indicated on the
display.
5. Now you can enjoy your MP3/WMA music by controlling the keys on
the device. For detail information about playback operation, see
“Basic Operation” section.
Note: If a removable disk and a memory card are both inserted properly, only
the audio files on the removable disk is transmitted and played.
[Play music on an extra audio player]
The device supports LINE-IN feature that enables you to enjoy the music from
an external audio device such as CD, MD player, etc. The external audio
source comes into the device through the line-in jack and is transmitted to the
FM tuner by the built-in FM transmitter. You enjoy the music through the FM
stereo audio system.
1. Connect one end of the LINE-IN cable to the line-in jack of the
device and connect the other end to the earphone jack of the
external audio device.
2. Turn on the external audio player and play the music.
3. Press the “+” key or “-” key to select the preset channel without
signal interference. You see the selected frequency indicated on
the display.
4. Tune the car FM radio to the same channel as indicated on the
display.
5. Now you can enjoy music with keys on the audio player.
Note: All keys except channel switch are unavailable when you use the line-in function.
You can only use the keys on the extra audio player to control the playback.
You can not use the Line-in or (USB flash disk/memory card stores) at the same time.