User's Manual

ManualsBrandsShenzhen Yifang Digital Technology ManualsElectronicsDigital Folder

- 1 -

﹡

For detail instructions on how to use the Digital Pen, see the User Manual stored in the CD.

﹡

This manual may not reflect your actual device’s operation. All information is subject to change

without prior notification. Please follow your actual device’s operational procedures.

Step by Step to Get Started

Layout your Note Pad on a flat surface

The base unit on top of the notepad should turn on automatically once you open the Note

Pad, with the

indicator blinking. It is not necessary to press any button turn it on.

Note: For initial use, your base unit needs to be charged for about 3 hours. Connect your

base unit to your PC using the USB cable for charging.

Write on the Note Pad

Pick up the Digital Pen attached on the Note Pad and write normally.

Note:

a. Be careful to hold the pen in a way that does not block the signals sent from the tip of

the pen to the base unit.

b. Make sure the pen point is 1.5cm away from the unit. Otherwise, the base unit may

not capture your handwriting.

STEP1

STEP

Summary of content (10 pages)

PAGE 1
﹡For detail instructions on how to use the Digital Pen, see the User Manual stored in the CD. ﹡This manual may not reflect your actual device’s operation. All information is subject to change without prior notification. Please follow your actual device’s operational procedures. Step by Step to Get Started STEP1 Layout your Note Pad on a flat surface The base unit on top of the notepad should turn on automatically once you open the Note Pad, with the indicator blinking.
PAGE 2
STEP3 Turn over the Page You can start a new page once you’ve finished one. Just turn over the page and then lift the base unit by its end to reverse. STEP4 Close your Note Pad Close your Note Pad once you finished all pages. All of your handwritten notes should be saved in your base unit. Before Using Charge the Battery For initial use, your base unit needs to be charged for about 3 hours. Connect your base unit to your PC using the USB cable for charging. Install Pen Batteries a. b. c.
PAGE 3
Installing Ink Refill To insert a new refill, 1. Slide the new refill into the tip of the pen. 2. Gently press the new refill until it is lodged securely in place. To replace the ink refill, 1. Detach the cap from the digital pen. 2. Clamp the ink refill with the refill extractor. Hold the pen firmly, and apply pressure with the extractor against it. 3. Pull the used refill out. View Notes on Computer 1.
PAGE 4
The Note Manager contains buttons that give you access to the most commonly used menu commands. The following table contains a list of each button in the toolbox together with a description of its function. Button Description UPLOAD – When in Connected Mode, you can upload all your notes from the mobile unit to your PC using the Digital Pen application Note To Text - Convert handwritten note to texts. (only available in Windows Vista or 7) Convert your note to text using MyScript® Notes.
PAGE 5
Connection Indicator Close Open a picture Save picture Change pen preference Send picture Eraser/Pen Redo Undo Installing Photo Sketcher Insert the Note Manager application CD into your PC, select “Photo Sketcher” and then install it following the wizard’s instruction. A desktop icon will be added once installation complete. Using Photo Sketcher Run the Photo Sketcher by clicking the desktop icon.
PAGE 6
Using your Digital Pen on Smart Phones With the built-in bluetooth technology, your Digital Pen can write or make drawings on smart phones with Blackberry or Google Android system. Turn on Bluetooth Firstly turn on the Bluetooth by pressing the Bluetooth button on the base unit. The Bluetooth indicator should blink. Working with Blackberry Devices 1. Install the Application In order to use the device on Blackberry devices, you first need to install the Note Manger application on the blackberry.
PAGE 7
Method 2(on Blackberry Device): Alternatively, you can install the application directly on your Blackberry. (1) Connect to the Blackberry Device's supplied AppWorld and download the iNote SW; (2) Run the iNote application from the Blackberry Device’s Download folder. 2. Turning the Digital Pen base unit on To turn the Digital Pen base unit ON, press & hold the button on its top until you see the number of notes stored in memory. 3.
PAGE 8
‐ Select ‘Upload’. Photo Sketcher You can sketch on any jpeg using your digital pen. Sketches can be done on existing images or pictures taken by the device camera. To start sketching: ‐ Click the button. ‐ Select ‘PhotoSketcher’ . To sketch on an existing photo: ‐ Select ‘Open’ . ‐ Select a file from the file list. ‐ Use the pen to sketch on the image. To sketch on an existing photo: ‐ Select ‘Snapshot’ to open an existing photo. ‐ Take a snapshot using the Blackberry camera.
PAGE 9
‐ ‐ ‐ ‐ ‐ ‐ Click the button. Select ‘Properties’. Change your selections. Click the button. To save the changes, select ‘Save’. To discard the changes, select ‘Discard’. Deleting a note from list To delete notes from the notes list: ‐ In the notes list, select a note. ‐ Click the button. ‐ Select ‘Delete’. Deleting notes from Pen memory To delete notes from the pen memory: button. ‐ Click the ‐ Select ‘Pen Memory’. ‐ Select ‘Erase memory’.
PAGE 10
FCC Warning: z This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: z (1) this device may not cause harmful interference, and z (2) this device must accept any interference received, including interference that may cause undesired operation. z Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.