User's Manual

Using the Systems
Bluetooth function
External Bluetooth devices can be connected to the TV sound bar system via Bluetooth
connection.
1. Press the BT button on the remote control to enter the Bluetooth mode. The Bluetooth
indicator lights up blue.
2. Activate the Bluetooth function of the external device and search for Bluetooth devices.
3. Select Sine Audio from the Bluetooth device list.
4. Follow the instructions shown on your device’s screen.
5. When the Bluetooth connection is established, files from your connected Bluetooth
device will be played through the sound bar.
Disconnecting the Bluetooth device:
Press M (Mode) button on the sound bar to enter AUX, OPT or COAX mode.
Press the OPT, COAX or AUX button on the remote control to enter AUX, OPT or
COAX mode.
Disconnect using your Bluetooth device. The sound bar starts searching for another
Bluetooth device.
Long press the BT button on the remote control or M (Mode) button on the sound bar
about 2 seconds to disconnect the current Bluetooth device. Long press about 2
seconds again to reconnect the current Bluetooth device.
Notes:
Bluetooth works best within a range of up to 33 feet (10 meters).
The music streaming may be interrupted by obstacles between the Bluetooth device
and sound bar, such as walls, metallic casing that covers the device, or other devices
nearby that operate in the same frequency.
If the connected device goes out of Bluetooth range, the system will reconnect
automatically when the device comes back within range.
The current Bluetooth device connection is saved in the memory even after the sound
bar is powered off.
18 - English