User's Manual
Using the Systems
Basic functions >>> Selecting a source
You can have several source devices connected permanently to the sound bar.
Available sources are: OPT / COAX / BT / AUX
Source
Function
OPT
Optical , connection with an optical fiber cable.
COAX
Coaxial, connection with a coaxial cable.
BT
Bluetooth, Connection to a Bluetooth Device.
AUX
Auxiliary, Connection with a RCA to RCA audio cable.
Auxiliary, Connection with a 1/8 inch(3.5mm) to RCA audio cable.
Press the M(Mode)button repeatedly on the sound bar or press the OPT, COAX, BT,
AUX button on the remote control to toggle between the sources, The OPT, COAX, BT,
AUX source indicator will light up blue accordingly.
You can boost / restore the volume by double clicking the boost button on the remote
control when you use AUX source (audio cable connection).
Basic functions >>> Play back functions
Normally playback functions can be managed through the controls of the connected
source device.
Alternatively, use the remote control and the buttons of the sound bar.
Key
Press Key
Function
M
1 X
Source selection
Long press 2 second
Disconnecting the Bluetooth device
I< / >I
1 X
Skip to the beginning of the previous / next title
- / +
1 X
Volume down / Volume up
>II / mute
1 X
Pause / Mute sound (Flash the indicator light).
2 X
Play / Restore sound.
Notes:
The volume boost and mode (source) selection is saved in the memory even after the
sound bar is powered off.
The audio output of the sound bar is affected by the settings of the connected source. If
necessary, adjust the settings of the source to improve the audio output.
English - 17