User's Manual

Using the Systems
Get power and started
Make sure all the source connections are made properly before you connect the power
adapter. Plug the power adapter to the DC IN socket, then to a suitable electrical outlet.
The power indicator lights up red. Indicating the sound bar is in standby mode.
Turning off your TV speakers: To avoid hearing distorted sound, turn off your TV
speakers. Refer to your TV’s user manual for more information.
Power on your sound bar: Press the Power button on the sound bar or remote control.
The power indicator lights up green.
Check if sound is coming from the sound bar.
Selecting a digital controlled audio processing sound mode
The digital controlled audio processing includes three sound mode: movie, music and
news.（Note:There is no sound mode indication on the sound bar)
To get a better sound effect, press the movie, music or news button on the remote
control to select a suitable sound mode.
The recommended sound mode selections as below:
Program source
Sound mode
Program source
Sound mode
Strong bass film
Music or news
Strong bass music
Music or news
General film
Movie or music
Pop music
Movie or Music
Documentary
Music or news
Light music
Music or news
Variety show
Music or news
News / Dialog
Music or news
Notes:
For the better sound quality, please set the volume of the sound bar to 75 percent of
maximum（Note: the maximum volume drop 3 levels is 75 percent）and set the volume
of your source device to a suitable level.
The sound mode selection and the volume settings are saved in the memory even after
the sound bar is powered off, and the volume setting from 75 percent to maximum will
be saved to 75 percent.
Set the volume of your source device to a low level before switching on the sound bar.
Then increase the volume of your source device to a comfortable level.
Disconnect the power adapter from the electrical outlet to power off your sound bar
completely.
16 - English