Total 50W 36 Inches Stereo TV Sound Bar System DS6X Series Model: DS6201/6301/6401/6501/6601/6701 DS6202/6302/6402/6502/6602/6702 DS6203/6303/6403/6503/6603/6703 DS6205/6305/6405/6505/6605/6705 User Manual
Table of Contentss Important Notes --------------------------------------------------------------------------------- 1 Important Safety Instructions ----------------------------------------------------------------- 2 Safety instructions i-------------------------------------------------------------------------- 2 Battery precautions ------------------------------------------------------------------------- 3 FCC information ----------------------------------------------------------------------------- 4 Packa
Important Notess Before using the TV sound bar system, please read the following important notes. Please read this user manual carefully and save it for future reference. For optical and coaxial cable connection, change your source device’s audio output setting to “PCM” format . Refer to your source device’s user manual for more information.
Important Safety Instructionss Do not make unauthorized alterations to the system, doing so may compromise safety, regulatory compliance, and may void the warranty. This system contains magnetic material, contact your physician if you have questions on whether this might affect the operation of your implantable medical device. Do not place naked flame sources,such as lighted candles,on or near the system. Safety instructions 1. Follow all safety instructions, and keep the user manual for further use! 2.
Important Safety Instructionss ithe use of the system by a person responsible for their safety. 12. Children should be supervised to ensure that they do not play with the system. 13. This system is classified as protection class II and must not be connected to a protective ground. 14. Regularly check the power plug and power cord for damage. If the supply cord is damaged. The adapter cannot be used and need to replace. 15. Avoid damage to the power cord. Do not crush, squeeze, bend, or scour on sharp edges.
Important Safety Instructionss 3. Do not mix different types of batteries together ( e.g: Alkaline and Carbon-zinc) or old batteries with fresh ones. 4. If the batteries in the device are consumed or the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible leakage. 5. Do not try to recharge the battery not intended to be recharged; it can overheat and rupture. (Follow battery manufacturer’s instructions.) 6.
Package Contentss 1 X Sound bar Accessories: 1 X Power adapter 1 X User manual 1 X Remote control 1 X Optical cable 1 X Coaxial cable 1 X Audio cable (RCA to RCA) 1 X Audio cable (stereo 1/8 inch(3.5mm) to RCA) 2 X Wall mount brackets 4 X Wall anchors 4 X Screws (M4 X 30mm) Note: Accessories are subject to change without notice.
Features and Specificationss Features Total 50 W power usage 36 inches TV sound bar 2.0 Channel two way speaker system 6 speaker drivers (4 woofer and 2 tweeter) Analog audio interface (AUX input) Digital audio interface (optical input and coaxial input) Stream music from smart phone or tablet The sound bar system can be mounted on the wall Full function infrared remote control Digital controlled audio processing sound mode Specifications Power supply Input : 100-240VAC 50/60Hz Output : 15VDC 2.
System Overviews Front view 14 11 12 1 2 3 4 5 12 6 7 8 9 10 12 12 11 Buttons 1. Mode (Source) 2. Play / Pause 4. Volume down 5. Volume up 3. Power（Standby） Source indicators 6. OPT (Optical) 7. COAX (Coaxial) 9. BT (Bluetooth) 10. AUX (Auxiliary) 11. Speaker driver (Tweeter) 8. Power（Standby） 12. Speaker driver (Woofer) 14.Remote control sensor Connector panel INPUT OUT POWER OPT COAX R AUX L SUB DCIN 15 16 17 18 19 15. Optical input socket 16.
System Overviews Remote control 20 21 22 23 25 24 26 27 29 28 30 31 32 33 Buttons 20. Power 22. HDMI 23. Volume + 24. Previous 25. Play pause / mute 21.Bluetooth 26. Next 27. Volume－ 28. Movie 29. Music 31. Optical 32. Coaxial 33. AUX / boost 30. News Note: HDMI button is only for the HDMI converter (not supplied).
Setting Up the Systems Unpacking Remove all packaging. Check for the presence of all parts and for transport damage. In case of damage or incomplete delivery, please contact your dealer. Please keep the packaging. The system can be stored in it, if not used for a longer period of time. Preparation The Sound bar system serves as an audio output device and features wireless and wired connections. You can place the sound bar on a horizontal surface or mount it on a wall.
Setting Up the Systems Caution! Make sure the power adapter is disconnected from the electrical outlet before making any mounting and connection. During operation, if the cables require to be reconnected, the power adapter must be disconnected first, otherwise damage to the system may result. Wall mounting 1. The distance between the two brackets. DS6501: 32.60inches(82.8cm) DS6502: 32.52inches(82.6cm) DS6503: 32.13inches(81.6cm) DS6505: 31.97inches(81.2cm) 2.
Setting Up the Systems Optical and coaxial cable connection Use the supplied optical cable or coaxial cable to connect the sound bar to a TV, DVD, Blu-Ray Player or other suitable devices. Connect one end to the optical or coaxial out socket of the TV, DVD, Blu-Ray Player or other suitable devices. Connect the other end to the optical or coaxial input socket of the sound bar.
Setting Up the Systems Audio cable connection 1 Use the supplied RCA to RCA audio cable to connect the sound bar to a TV, DVD, Blu-Ray Player or other suitable devices. Connect one end to the headphone or line out socket of the TV, DVD, Blu-Ray Player or other suitable devices. Connect the other end to the AUX(L/R) input sockets of the sound bar.
Setting Up the Systems Audio cable connection 2 If your TV or other source device only has a headphones socket, use the supplied stereo 1/8 inch (3.5mm) to RCA audio cable to connect the sound bar to your TV or other source devices. Connect one end to the headphones socket of the TV or other source devices. Connect the other end to the AUX(L/R) input sockets of the sound bar. Ensure your TV speakers are turned on. Refer to your TV’s user manual for more information.
Using the systems Using the remote control >>> Inserting/replacing batteries 1. Slide to open the battery compartment cover. 2. Insert 2 X 1.5V AAA batteries (not supplied) into the battery compartment. Match the polarity markings in the battery compartment. 3. Close the battery compartment cover. 1 2 3 Caution! The sound bar can only work with the remote control package included, not compatible with universal remote control. Always insert the batteries according to the correct polarity markings.
Using the systems Using the remote control >>> Remote control operation range: Remote sensor Approx. 16.
Using the Systems Get power and started Make sure all the source connections are made properly before you connect the power adapter. Plug the power adapter to the DC IN socket, then to a suitable electrical outlet. The power indicator lights up red. Indicating the sound bar is in standby mode. Turning off your TV speakers: To avoid hearing distorted sound, turn off your TV speakers. Refer to your TV’s user manual for more information.
Using the Systems Basic functions >>> Selecting a source You can have several source devices connected permanently to the sound bar. Available sources are: OPT / COAX / BT / AUX Source OPT Function Optical , connection with an optical fiber cable. COAX Coaxial, connection with a coaxial cable. BT Bluetooth, Connection to a Bluetooth Device. Auxiliary, Connection with a RCA to RCA audio cable. AUX Auxiliary, Connection with a 1/8 inch(3.5mm) to RCA audio cable.
Using the Systems Bluetooth function External Bluetooth devices can be connected to the TV sound bar system via Bluetooth connection. 1. Press the BT button on the remote control to enter the Bluetooth mode. The Bluetooth indicator lights up blue. 2. Activate the Bluetooth function of the external device and search for Bluetooth devices. 3. Select Sine Audio from the Bluetooth device list. 4. Follow the instructions shown on your device’s screen. 5.
Troubleshootings Problem No power Solution Check the power adapter is properly connected to an electrical outlet. Check the DC plug is properly connected to the DC IN socket. Unplug the power adapter for at least one minute and reconnect. No Sound Press the Power button on the sound bar or remote control to turn on the sound bar. The power indicator lights up green. Increase your TV’s volume to maximum. Press MUTE button on the remote control to restore sound.
Troubleshootings Problem Poor audio quality Solution Reduce the volume of your source device. Audio cable connection: Double clicking the boost button on the remote control to restore the volume. Bluetooth connection: Bring the Bluetooth device closer to the sound bar and make sure that no obstacles are disturbing the connection. Remote Ensure that the batteries are correctly inserted; if necessary, replace control does the batteries.
Care and Maintenances Cleaning Warning! Before cleaning, ensure to switch the system off and disconnect the power adapter from the electrical outlet. Do not use petrol, alcohol or other abrasive cleansers to clean the exterior. Clean the surface of the system with a soft , dry cloth. Do not use any sprays near the system. Do not use any solvents, chemicals or cleaning solutions containing alcohol, ammonia or abrasives. Do not allow liquids to spill into any openings.
Ten years, just for original sound English - V1.
