User's Manual

www.jcgcom.com
16
Chapter 6: Wireless Setup
To click the wireless setup main menu, the independent menu will display to set 5G and
2.4G wireless network parameters (WLAN1 represents 5G wireless network and WLAN2
represents 2.4G wireless network). The setup mode is basically same. Taking 2.4G wireless
setup as one example:
6.1 Basic setup
Basic setup: a user mainly sets up the basic parameters of the wireless network such as
wireless network mode, SSID, channel and frequency.
Name of wireless network (SSID)- wireless network identifier, which can distinguish
different wireless networks.
Hide SSID – hide the name of a wireless network, but the client can still manual input SSID
to connect the access point.
Connected client- to click the client, a user can know the information on the client
connected via the current 2.4G wireless network (shown as the following gure).