User's Manual
www.jcgcom.com
13
4. Quickly set up the network (default routing mode)
Set the wireless name and wireless password of the 5G wireless network at the position 1.
Set the wireless name and wireless password of the 2.4G wireless network at the position 2.
Set the network connection type of the WAN at the position 3 (the network connection
mode is identied as follows:)
Method 1: if you connect the Internet with a xed IP, please select “static IP address” and
input the information supplied by the broadband service supplier.
Method 2: if your broadband service supplier does not provide any parameter, please select
“Automatically get (DHCP)”.
Method 3: if your broadband service supplier provides one account password, please select
“PPPOE dialing” and input correct broadband account and password.
After setup, please click “Save/Apply” button.
Chapter 5: Operation Mode
Gateway mode – (router) under this mode, the rst Ethernet interface is used to connect
WAN as the WAN interface. Other Ethernet interfaces and wireless network interfaces are