Quick Start Guide

Bluetooth connection
Quick Start Guide
Use method
Extend the tripod
4
1
Charging
5
Non- stabilizer mode
When the stabilizer is shut down or out of power, Rotate to
tighten in the locking direction, the rotation function
of the stabilizer disappears, and it will become a common
end, the stabilizer mode will be restored.)
1
Holder charging mode
Use the tripod (optional)
2
1
2
Open the bottom tripod, uplift the pull rod and put tripod on
horizontal plane.
3
Usage mode of Stabilizer holder
Connect the Micro USB interface of the stabilizer holder for
charging, and the red light will be on for a long time during
the process of charging. The red lamp will be off automatically
.
Connect the Micro USB interface charging, and the red light will
be on for a long time during
the process of charging. The
red lamp will be off automatically
.
Product description
YMP
3
4
5
6
Add：Shajing Road 211-3, Shatou Industry Area, Shajing
Street, Bao’an District, Shenzhen China, 518104
4
Micro USB Charging interface
Micro USB interface
3
Rotate locking knob
2
Balcony indicator
1
Stabilizer switch button
8
Photo key
7
Remote controller indicator
Tripod
9
5
Rotary lock
Aluminum pull rod
6
After clamping the mobile phone
and keeping the phone in natural
balance, then long press the power
button for 3 seconds to start up.
Clicking the power button of the
stabilizer holder, and it will rotate
90 degrees counterclockwise.
After starting up, it will enter the
stable mode, move the holder,
and the mobile phone will always
keep a constant direction.
90°
Photograph key
Indicator lamp
stabilizer Rotary Locking button
Single Axis Stabilizer Tripod
2
Open Bluetooth of mobile phone to enter search state and
click “YMP” in equipment searched; after connection is
2
Charging Mode of Remote Controller
Remote controller：Keep press the camera button for 3 seconds,
been turned off.
Stabilizer holder：Keep press the stabilizer button for 3 seconds,
the green light goes off, indicating that it has been turned off.
1,When the stabilizer holder holds the mobile phone, try to keep
the mobile phone centered. If it can’t centered, it is recommended
to use the vertical screen mode.
not operate within 10 minutes after Bluetooth connection，then
press the camera button again to recover connection
3，When using the remote control, if the battery is low, the remote
Powering off
If you use an Android phone, before taking photos,ensure
that the volume button of your phone is set to the shutter
button in camera settings.
1
Micro USB interface
9
8
6
5
7
2
4
3
1
Electric parameter
Rated voltage:DC3.7V(lithium battery ),DC5V(charge)
Operating voltage range:3.3-4.2V
Bluetooth core specication version:4.2