Use Instructions

Auto Return Home

1.One-key Return Home

Remote control: Press and hold the auto-return button

for 3-5 seconds or tap the return home icon on the APP to start

one-key return, the remote control will emit two beeps to indicate

that the return home function is activated, and the drone will

automatically fly back to the vicinity of the take-off point.

To cancel the one-key return home process: Long press the return

button and the remote control will beep once or tap the icon X

to exit the return to home process.

2. Smart Low Battery Return Home

1.When the drone flies with low-power, the remote control will

always alarm. In GPS mode, the drone will return by itself to

within 20 meters of the takeoff point. The drone can fly for about

5 minutes under low power.

2.When the drone does not have enough battery power to fly, the

remote control will alarm rapidly all the time. At the same time,

the drone will automatically return.

3. Return upon out of Control

If the drone and the remote control lose connection, the drone will

automatically enter the return home mode. The drone will

automatically return and land on the ground. If the drone and the

remote control get connected again during the return process,

the drone will hover and user can re-control the drone by the

remote control.

Note: This drone does not have automatic obstacle avoidance

function. If the drone hits a building or other obstacles on its

way back home, it will crash.

Note: The drone can return home only when it is in GPS mode and

searched for enough satellites outdoors. Return home cannot

be achieved in indoor mode.