Product Specs

1. Perv/V-/CH-
2. Next/V+/CH+
3. TF Card
4. Open/Close
5. Play/Pause/Answer/Hang up/FM
6. Microphone
7. Type-c Charge port
8. Channel Display Screen
9. LED Indicate
Instructions
1.Adjust the screw cap to the best active status
2.Power supply:Connect the BC-01 Type-C port and car USB port (or charge adabtor)with the Type-C cable.
Note:For fast wireless charging mode must use Qualcomm quick charge adaptor.
3.Press the button of clip to fix, then adjust the angle and tighten the fixed nut.
4.Bluetooth function：
*It's bluetooth mode when the two indictor flicker, then turn on smartphone bluetooth function and fund
bluetooth device“BC01”to connect.
*It's FM mode when the display screen flicker, then set the BC01 channel as same as car radio channel(NOTE:
car radio has no local radio program)
*connected successful and enjoy music
*If there is any noise, please set car radio frequency up/down 0.1MHZ
5.Wireless charge：
*Smartphone must has wireless charge function
*Put your smartphone on the Bracket. (It's better after BC-01 bluetooth has connected your smartphone)
6.Take off smartphone
Touch the open/close button ,the clips automatically open,then take your phone out.
Buttons Functions
Perv/V-/CH-
Next/V+/CH+
Bluetooth/TF Card Mode:
Short Touch—Previous
Long Touch—Volume Down
FM Mode
Short Touch—Channel Down
Long Touch—Channel Down Fast
Bluetooth/TF Card Mode:
Short Touch—Next Song
Long Touch—Volume Up
FM Mode:
Short Touch—Channel Up
Long Touch—Channel Up Fast
Play/Pause
Open/Close
Call Mode:
Answer—Short Touch
Refuse—Long Touch
Hang up—Short Touch
Replay Call—Double
Music Mode:
Play—Short Touch
Pause—Short Touch
Enter FM Mode:
Enter—Long Touch untill Display Screen Flicker
Exit—Short Touch
Open Bracket—Short Touch
Close Bracket—Short Touch
Wireless charging specification：
input：5V-2A or 9V-1.67A
output: 10W/7.5W/5W
Wireless charging
Distance: 3-6mm(max)
Conversion Efficiency：70%-75%
Operating Frequency: 110-205KHz
Bluetooth specification:
Bluetooth Version: 5.0
Operating Frequency: 2.4G
Sound Channel: Stereo
FM Channel: 85-110MHz
Bluetooth Distance：≤ 10m
TF card: Maximum support 32G
Package：
1*BC-01
1*Clip
1*Extended bracket
1*Type-C cable
1*User manuel
Product Specification
Product model：BC-01
Material：Fireproof PC+ABS
Color：Black
Features:
1. Wireless changing for devices with Qi standard
2. Charging fast at 10W,7.5W and ordinary at 5W,compatible with Apple and Android devices.
3. Wireless charging sensing:when the phone with wireless charge receiver approaches the charger, the two clips will
automatically clip the phone and charge wirelessly.
4. Foreign body detection sensing:when the phone with none of the receiver approaches the charger,the two clips
will also automatically clip the phone,then use it for a phone holder.
5. The clips can extend and reteact flexibly,so easily fix phone to charge or release to use.
6. New upgrade mute design:Using the mute motor,the clips stretch and shrink with no noise.
7. 360° rotation: The handle supports 360° rotation,which enables you to find suitable directions to place your
phone on or get you phone off.
8. Over-current protection,over-heat protection and short-circuit protection.
9. Certification:FCC,CE,ROHS
Warranty
This device is free from defects in material and workmanship under normal use for twelve(12)months commencing
upon the date of purchase. Proof of purchase is required for warranty service.The consumer should never attempt
to open or disassemble the device,and doing so may cause damage that voids your warranty.
USER MANUEL
Installation steps
1.Adjust the screw cap to the best active
status
2.Input:Connect the wireless charger and
car adapter with the charging cord.
Must use Qualcomm quick charge
adaptor for fast wireless charging.
3.Press the button of clip to fix, then
adjust the angle and tighten the fixed nut.
4.Place smartphone:The charger can
sense your phone when approach,the
clips will automatically grip your phone
and wireless charge.
5.Take off smartphone
Touch the on-off button ,the clips
automatically open,then take your phone
out.
1. Air outlet clip fixing method
2. Extend the bracket fixing method