Safety Instructions
Amysen
Smart Bluetooth Mesh Plug
Works with Alexa Devices Only
·Safety Instructions
Read and follow all the safety instructions
.The plug is recommended for using indoors
nd in a dry location only
The smart plug should only be used within
ssued outlet rating that stated in the instructions
Please correctly plug in the socket and keep away
rom children.
· Please make sure to plug in the socket fully
before using
·Please do not disassemble the plug.Otherwise
the plug may get damaged or become a safety hazard
· Please contact with us for a replacement if any
damage caused by transportation
· Instruction
· Our Smart Bluetooth Mesh Plug offer an easy
solution to having voice-controllable smart
devices in your home
The plugs enable you to control your appliance
hrough the Alexa app on your phones or
simply voice commands
Note. The Alexa devices that supports
BLE Mesh connection includes
Echo 2nd Gen, Echo 3rd Gen
Echo Dot 2nd Gen
Echo Dot 3rd Gen, Echo Dot 3rd Gen with clock
Echo Plus lst Gen
Echo Plus 2nd Gen, Echo Show lst Gen
Echo Show 5, Echo Show 8
Echo Show 10, Echo Spot, Echo Input
Echo Flex, Echo Studio
· Note: If you cannot control the smart plug
with above Alexa devices
olease update the smart plug
The way of update: search "Smart Life”
n APP store and download it, update the
mart plug through the Smart Life APP.
Specifications
Power Supply;AC125V-60Hz
Load Current:10A Max. Resistive load
Compatible Device. Alexa only
·Operation Temperature:-20°to60°C/-4°to 122°
Design:Compact Design
·Installing your plug
Note:Please ensure your Amazon Alexa device
s setup before adding the smart plug
t needs to have the latest software upgrade
You can try"Alexa, is your software up to date?"
to trigger software update, then add the plug
Plug in the plug and power it
· Say"Alexa, discovery devices"to Alexa device
When the plug get discovered and connected
with the Echo device, you will receive a
notification from Alexa app
You may also receive a voice prompt from your
Echo device
Mesh Network Setup
If you want to have multiple plugs setup for
different rooms, especially the rooms out o
the range of the Alexa device Bluetooth signal
you can utiize Mesh Network setup to extend
he range
Setup the smart plug near the Alexa device
.Turn off the plug and move it away from the
Alexa device and make sure it is in the range
of another smart plug Bluetooth signal which
s connected on the network as a node
This will form a Bluetooth Mesh network.
Each connected plug will connect with other
olugs in the network
Reset nstructions
·Power the smart plug,then press and hold the
ON/OFF button for 5 second5. If the reset success
he LED light on the plug will flash at a uniform
speed.If it not, you will have to try it again
· Once success,please try to pair it with your Alexa
device again
·Operation
:On/off
:"Alexa, turn on plug 1"
·"Alexa, turn off plug 1"
·"Alexa, turn on all the plugs
Customer Service
Warranty:24 months
Support: Lifetime Technical Support
FCC Statement
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
Any Changes or modifications not expressly approved by
the party responsible for compliance could void the user's
authority to operate the equipment.
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception, which
can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by
one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and
receiver.
—Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician
for help.