Operation Instructions

operation instructions
Radar induction+RGB touch+wireless charging multi-function intelligent box
Product introduction
XX1056-1-4The smart RGB box is powered by two USB ports（USB-A，Type-C），Meet the general
charging requirements of all mobile phone models。Built in body sensor，Able to detect object
approaching within 2m，Enable intelligent induction to turn on lights。With 24 color RGB color
temperature, fast charging 15W wireless charging function
Product diagram
Operating Instructions
This touch button realizes the functions of light strip switch, light color switch, light on/off, etc
A． Touch this button once for each click to turn on and off the lights（The indicator light goes out）
Turn on the light again（Indicator light is on），This cycle。Note that every click and touch of this
button will turn off the radar sensing function（The indicator light of the radar button is off）。
B． When any light is on, long press and touch this button to realize the dimming function. The light changes
until the touch is released, and the brightness of the light will remain until the next long touch dimming.
This touch button is used to switch the radar sensing function
A． Click and touch this button once to turn on the radar sensing function (the indicator light is on). After
people leave or stay still for more than 30 seconds, the light strip goes out; When the light strip is
off, people including objects within 2 meters will light up the light strip.
B． Long press and touch this button for 0.5 seconds to turn off the human body sensing function (the indicator
light is off). At this time, the light strip will remain in the state before it is closed, and will no
longer be affected by the activities of people and objects.
This sign area is for wireless charging function, which supports fast charging with a maximum power of 15W.
During charging, the product should be placed in the middle of the sign to maximize the charging efficiency.
After power on, the wireless charging function is enabled by default. You only need to place the electronic products
to be charged in the wireless charging area to realize charging.