User's Manual

XT-18
无线蓝牙耳机
使用说明手册
连接说明
操作说明
基本参数
保修说明
1
开机配对
打开充电仓取出耳机，自动开机
并配对，或长按功能键5秒，
耳机会亮灯并伴有提示音
首次使用时先将耳机放入充电
仓，插上充电线，将耳机和
充电仓充满
2
设备连接
打开手机蓝牙，然后搜索XT-18蓝牙名称点击连接.
XT -1 8
XT -1 8
确保 手机蓝牙打开
设备 搜索XT-18
连接 成功
1
功能操作
2
更改配对、关机、充电
1、打开充电仓盖取出耳机自动开机，会自动连接最近一次
配对过的手机.
2、如需配对其它手机，请关闭原手机的蓝牙，在蓝牙耳
机开机状态下，其他手机打开蓝牙即可搜索设备名.
3、不使用耳机时，将耳机放入充电盒，耳机会自动关机
并补充电量，如果未带充电盒，手机断开蓝牙，大约5分钟
后耳机会自动关机
尊敬的客户，你好！
承蒙惠顾本公司的产品，为了保证你的利益，请您在购买
本产品后，仔细阅读说明书及以下内容：（下列情况不属
于保修范围，本公司可提供有偿服务，敬请注意）
1、未按使用说明书操作、使用、保管，导致本产品
故障和损坏。
2、擅自涂鸦，撕毁产品包装以及条码。
3、擅自改动出厂设置和拆机修理。
4、意外因素或者人为导致产品损坏，如输入不合格
的电压，高温、进水、破坏、产品严重氧化或者生锈等。
5、因不可抗拒，如地震、火灾、水灾、雷击等导致的
故障和损坏。
注意事项
长时间使用耳机可能会造成听力损害，请合理安排使用时间。
请勿使用不合格充电器和高电压电流充电
请勿丟掷，避免因跌落而造成产品损坏
请勿自行拆解，修理或改造本产品、
请勿使用化学溶剂擦拭本产品
L
长按1.5秒L/R：拒绝来电
单击L/R：播放/暂停
双击L边耳机：上一曲
双击R边耳机：下一曲
本设备支持单耳模式和双耳模式，左右耳机可以随意切换使
用，单耳模式时，功能操作跟双耳模式一样。
单击接听电话（再次单击挂断）
三击L边耳机：减少音量
三击R边耳机：增加音量
启动SIRI:长按2秒松开
名 称
蓝牙版本
待机时间
耳机充电时间
通话时间
耳机电池容量
充电盒电池容量
XT-18无线蓝牙耳机
5.0+EDR
10米
120H
1H
4H
45毫安
300毫安
产品特点
全新蓝牙5.0版本，更多无线高清体验
分离式机身设计，享受真无线立体声效
可充电式收纳盒收纳即可为耳机充电
充电仓电量显示
充电指示灯
触摸点
Type-c充电口
L
R
XT-18
蓝牙距离
充电仓充电
请使用5V-1A充电器充电
包装清单
真无线蓝牙耳机......................1对
耳机充电仓............................1个
Type-c充电线........................1个
说明书..................................1个
耳帽.....................................2对
True Wireless Earphone
充电仓采用LED超清数字电量显示
User manual
Charging
indicator
Charging case
power display
Touch point
Type - c
charging port
Packing List
Wireless Earphone................................ 2pcs
Charging case.......................................... 1pcs
Type-C Charging Cable.......................1pcs
User Manual..............................................1pcs
Ear cap..........................................................4pcs
Product specification
Connection instructions
Power-on pairing
1
Open the charge case and take out
the earphones, it will automatically
power on and pairing. Or long touch
earphones for 5 s, it will have indicator
light and prompt sound.
Please charge fully the charging
case and earphones when then
first time to use
Device to connect
2
Turn on Bluetooth, then search for XT-18 Bluetooth name
and click to connect.
Bluetooth Settings
Blue too th
My device
XT-18
Bluetooth Settings
Blue too th
My device
XT-18
connected
Make s ure y our dev ice i s Bluet oot h
enab led t o searc h for X T-18
Co nnec tion s ucce ssfu l
Instructions
Functional operation
1
L
R
Once touch the L/R Play/Pause
Double touch the L : Previous song
Double touch the R : Next song
:
Triple touch the L : Volume down
Long touch 1.5s the L/R when call coming : Reject the call
This device supports single mode and binaural mode,
two modes can switch freely . And the functinal operation
are same.
Once touch the L/R when calling : Hang up the call
2
Change pairing，power off,charging
1. Open the charge case and take out the earphones,
it will power on connected the last time paired phone
automatically.
2. If need to pair with other phones, please turn off the
bluetooth of paired phone. Then power on the earphones,
use other phones search and click the bluetoonth name.
3, When not using the earphongs, please put it into charge
case. It will power off and charging automatically.
If disconnect , the earphones will power off after 5 minutes.
Basic parameters
Name
Chipset version
Work distance
Standby time
Earphones Charging Time
Talking time
Earphones battery capacity
Battery capacity of charging case
Please use the 5V-1A charger for charging
XT-18 True Wireless Earphone
5.0+EDR
10meters
120H
1H
4H
45Mah
300Mah
Product features
New version , more wireless HD experience.
Separated fuselage design, enjoy true wireless
stereo effect.
Rechargeable storage box can charge the earphones.
Charging case using LED ultra - clear digital
power display.
5.0
warranty description
Dear customer,
Thank you for your patronage of our products, in order to
ensure your interests, please carefully read the instructions
and the following contents (the following conditions are not
covered by the warranty, the company can provide paid
services, please pay attention)
1. Failure to operate, use and keep the product in accordance
with the operation instructions leads to failure and damage
of the product.
2. Unauthorized graffiti, tear up the product packaging
and bar code.
3. Unauthorized modification of factory Settings and
dismantling repair.
4. Accidental factors or man-made product damage, such as
input unqualified voltage, high temperature, water, damage,
serious oxidation of the product or rust, etc.
5. Failure and damage caused by force majeure, such as
earthquake, fire, flood, lightning strike, etc.
It may cause hearing damage under longtime using ,
please arrange the use time reasonably.
Do not use unqualified charger and high voltage current charging.
Do not throw, to avoid the product damage caused by falling.
Do not disassemble, repair or alter the product by yourself.
Do not use chemical solvent to wipe the product.
Precautions
Triple touch the R : Volume up
long touch 2s the L/R : Wake up Siri