Schematics

Report No.: BCTC2104274903E
No.：BCTC/RF-EMC-007 Page: 43 of 69 Edition：A.3
11. MAXIMUM PEAK OUTPUT POWER
11.1 Block Diagram Of Test Setup
11.2 Limit
FCC Part15 (15.247) , Subpart C
Section
Test Item
Limit
Frequency Range
(MHz)
Result
15.247(b)(1)
Peak Output
Power
0.125 watt or
21dBm
2400-2483.5
PASS
11.3 Test procedure
1. Remove the antenna from the EUT and then connect a low RF cable from the antenna
port to the spectrum.
2. Set the spectrum analyzer: RBW = 3MHz. VBW = 3MHz. Sweep = auto; Detector
Function = Peak.
3. Keep the EUT in transmitting at lowest, medium and highest channel individually.
Record the max value.