User's Manual

3
If the Dongle be in sleep mode, press the Comb key to wake up, then Dongle access to registration mode, Status LED will
flash as frequency 2 Hz to wait for the connection with Remote ,Remote and Dongle reset the identification ID and confirm the
channel to complete the wireless connection, the Status LED located on the Remote flashes On 100msOff 900ms
●Step 1 : After press Comb Key to wake up the Dongle,, Dongle access to the registration mode, the Status LED will flash
quickly as frequency 2 Hz
●Step 2 : When Remote access to the registration mode, the Connect LED will flash quickly as frequency 2 Hz
●Step 3 : Wireless Remote and Dongle re-set identification ID and confirm the channel to complete the connection.
■ Connect line status description:
● When Remote and Dongle be in connection status, if Dongle interrupted, the Connect LED located on the Remote
access to the connect line mode, flash as frequency 1 Hz, then turn Dongle on or press the Comb Key to
complete the connection with Remote
● When Remote and Dongle be in connection status, press Comb Key located on the Dongle and keep 4 sec, Dongle
access to the registration mode ,the Status LED flash as frequency 2Hz and disconnect with the Remote , The
Stauts LED flash as frequency 1 Hz indicatin the Remote access to the connection mode.If the connection has
been lost in 10 sec. The Dongle will access to the sleep mode.Repress the Comb Key return to the connection
mode to complete the connection.
● Remote access to registration mode, Connect LED flashes as frequency 2 Hz, if more than two-Dongle
Be in registration or connection mode, the connection between Remote and any Dongle will be
completed randomly
● Dongle access to registration mode, Status LED flashes as frequency 2 Hz, i if more than two-Remote
Be in registration or connection mode, the connection between Dongle and any Remote will be completed randomly
●When Remote and Dongle be in connection status, plug the Remote, the Connect LED located on the Remote
access to the connection status and flash as frenquency1 Hz, StatusLED located on the Dongle access to the
connection status, Status LED flashes as frenquency 1 Hz, press the Comb Key located on the Dongle and keep 4
sec to the registration mode forcibly or presss the Comb Key after Dongle access to the Sleep mode to awake
Dongle to complete the connection with Remote . .
■Technical parameters
Structure:：
1、Receiver Dimensions
： (L) 83.8mm * (W) 42.0mm* (H) 65mm
2、Receiver Weight
：60g
3、Transmitter Dimensions：(L)43.25 mm*(W)35.6 mm *(H)31 mm
4、Transmitter Weight：14 g