User's Manual

1
USER’S MANUAL OF
WII Controller RF connector
CM3920
■Product Description：
The Wii Controller RF Connector is adapt to the connection use of between Wii Remote Control and Nunchuk, This
product actualized the connection via wireless and improved the distance of game. It can enhance your game feeling
through the transfer of ISM Band 2.4 Wireless.
■Specification Description：
RF Specification Description
1. 2.4GHz Multi Channel RF Mode
Using a 2.4 GHz Multi Channel RF (2402 ~ 2476MHz) transfer modules frequency-jumping mode.
2. Channel searching for the address automatically to complete one-on-one
matching function.
when the connection between transmitter and receiver completed,
It will exchange data throught frequency-hopping mode in 75 channel data exchange.
Dongle in Wii Nunchuk
1. Compatible with the Wii Nunchuk tie-in specification
Compatible with the corresponding function of Wii Nunchuk tie-in
2. Support a Comb button
●When the Dongle be in sleeping mode, press the Comb Key to wake up the Dongle,then access to the
registration mode.Waiting for the connection with Remote.
●After the Dongle in the data transfer mode ,press the Comb Key and keep 4 seconds ,then Dongle enter into the
registration mode , waiting for the connection with the un-registered Remote, if the connection has been lost in the 10
seconds,the Status LED will be off, the Dongle access to Sleeping Mode, Re-press the Comb Key within 10 seconds to
establish the connection between Dongle and Remote .
3. Support a Status LED function
●Link mode：Status LED flash as the frequency 1Hz(On500mS Off500mS)
 After complete the connection with Remote, then display the date transfer status.