Air Quality Detector Users Manual MH-058 (WIFI version) Special statement: The illustrations of the products, accessories and user interface in the manual are all schematic diagrams and are for reference only. If there is a difference between the actual product and the schematic diagram due to product updates and upgrades, please refer to the actual product received and the manufacturer will not notify you separately.
Be efore sta art 1) Th his product should not be e dipped in water, w nor sho ould it be placed in a high h temperature e environment exceeding 60℃.. 2) Th his product belongs b to prrecision meassuring instrum ment and sha all not be dismantled with hout auth horization. 3) It cannot be measured m in the environment of organiic gas with to oo high conce entration forr a long g time.
Note: 1. Press Power button 5S to power on or power off; 2. When device is alarming, user can press Mute button, after 15s, warning function will be recovered. 3. Press Mute button for 5S, till there was a short beep, device has turned on or off Alarm function. When LED is green, means turn off the alarm function; when LED is off, means turn on the alarm function. 4. To press WIFI button, press it for 5S, till there was a short beep, device will unbind the mobile APP WIFI connecting.
Main Specification 1. Product Name: Air Quality Detector 2. Model Name: MH-058 (Tuya WIFI-BT Version) 3. Detecting Item: CO2 / Temp / Hum / AQI / HCHO / PM2.5 4. Material: ABS/Acrylic/Electronic Components/Air Sensors 5. CO2 : 400-5000ppm (±50ppm + 6%) 6. PM2.5: 0-999μg/m³ 7. HCHO: 0-9999μg/m³ 8. AQI : 0-99 9. Temperature : 0-55℃ (C/F switchable) 10. Humidity : 0-99% 11. WIFI icon : WIFI function active, display WIFI icon (Option) 12. Battery icon : Show battery usage and charging status; 13.
AP PP using g 1. APP A name: Tuya T Smart 2. App A icon& QR Q code: 3.
PC Tool using Before using, please check if you computer support CH340 serial port. User can operate PC tool as guide. Notice: PC tool requires device working as least 24 hours.
FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
