Instruction Manual

Bluetooth audio projector lamp instruction manual
Basic skills
1. Colorful rotate lights
2. Bluetooth play music
3. U disk to play music
4. The memory card plays music
5. FM radio
Function description
1. Turn on/off: turn the product switch to the "OFF" position, the product will be turned
off;To the “ON” position, the product is turned on, and the Bluetooth mode is entered by
default. Press Click the LED button to emit colorful lights.
2. Mode switching: long press the pause button to switch the playback source, in Bluetooth,
U disk, memory Switch between the three card modes, the conversion sequence is:
Bluetooth-U disk-memory card.
Bluetooth connection method
1. Turn on the device and enter the Bluetooth mode directly, and a "Bluetooth" sound will
be emitted.Turn on the mobile phone or other Bluetooth device, search for “NKDISCO”,
click manually Connected, the connection is successful, it will emit a “Bluetooth" sound, it
has been paired to If the device is powered on, it will automatically connect when the
Bluetooth is turned on the next time it is turned on.
Note: Within 10 seconds of entering Bluetooth mode, Bluetooth will automatically find and
pair the device Connect, connect by hand after 10 seconds.
Key operation
1. Long press Volume increase, click Next Song. Long Press Volume
Decrease, Click Previous Song.
Red indicator light: charging indicator, the charging status indicator red light is on, and the
red light is off when it is fully charged.